Am Montag, 15. Oktober 2007 02:57:00 schrieb Stefan Reinauer:
- Harald Gutmann harald.gutmann@gmx.net [071015 02:16]:
+static void check_n_write_enable() {
- uint8_t result[3] = {0, 0, 0};
- uint8_t command[5] = {0x06, 0, 0, 0, 0};
- // Send WREN (Write Enable)
- it8716f_spi_command(it8716f_flashport, 1, 0, command, result);
- uint8_t reg=regval(it8716f_flashport,0x24);
- reg|=(1<<4);
- regwrite(it8716f_flashport,0x24,reg);
+}
i think some parts here could be done easyer with outb.
This implementation of the MX25L4005 relies heavily on the chip being attached to an IT8716F SuperIO.
yes, it does!
I think we should create an abstraction
would be good.
layer (spi_command()? read_spi_status()?) that can be implemented by a SuperIO or southbridge that has an SPI bus attached. This way we could have fairly generic SPI flash chip drivers (most SPI chips are pretty similar too, I think), and they could be used on a new system by just implementing the southbridge/SuperIO specific part in some other place.
i also think that the spi programming is fairly generic on SPI flash devices.
Stefan
regards, Harald