Re: [LinuxBIOS] Two problems

[Ward Vandewege]

On Thu, Sep 14, 2006 at 01:32:20PM +0200, Stefan Reinauer wrote:
> > I am using FILO in
> >
> > Etherboot to boot linux already stored in a SATA disk. But I am getting
> > the following message -
> >
> > No Drive detected on IDE Channel 2
> SATA drives are recognized first in the chain. Try hda instead of hde.

For what it's worth; I had the exact same problem yesterday, and it turned
out that the sata drives were plugged in to ports 3 and 4 instead of 1 and 2;
FILO (0.5) did not seem to like that very much, it simply didn't see the
drives.

Thanks,
Ward.