On 07/12/2018 11:04 PM, Taiidan@gmx.com wrote:
I will provide logs soon! what do you want exactly?
One apparent regression I have noticed is that "sensors" reports CPU power usage at idle is now steady at 101W vs the usual 50W (which used to be 40 before a kernel update) while I am not sure if it is accurate as the cpu temp doesn't reach high levels expected for such wattage it does have one bad effect in that Turbo 2 no longer works...and even before this update with my v4.6 to get Turbo 1 on all cores as AMD advertises I must use "tpc -psmax 1"[1] which brings up the sensors reported TDP to 125W whereas normally it wouldn't work due to maxing out at 115W and 3.35ghz rather than T1 3.5ghz the TDP determining when the CPU enters full turbo 1.
I use Turbo 2 to obtain better performance on non-multithreaded games so this is disappointing but I will investigate further.
[1] turionpowercontrol, an overclocking software
This sounds like CC6 broke. Can you check to see if CC6 is enabled in your NVRAM settings?