Re: [coreboot] .. Re: .. Re: Via epia

[jtd]

On Sunday 23 March 2008 03:53 am, Jacek Chruscik wrote:
> Hi,
>
> your config.lb points at
>
> chip superio/ite/it8705f
>
> can you verify if this is actually what you have on your board?

yes. It is it8705f. verified by reading the chip marking and 
superiotool.
> My epia has vt1211 for example.
> There's not much set-up needed to initialise serial port, and it's
> rather straight forward.
>
> did you try to actually write it to flash and boot up,

yes. wrote the chip and verified correctly. Then booted.
> or just under qemu?

Tried qemu after that as there was no serial output. 
The serial port is working correctly with the null modem.