Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "uwe" checked in revision 2716 to the LinuxBIOS source repository and caused the following changes:
Change Log: Add support for the IEI JUKI-511P and IEI ROCKY-512 half-size boards.
Both are very similar, thus both use the JUKI-511P target.
Linux with patches from Juergen Beisert (http://www.linuxbios.org/pipermail/linuxbios/2007-May/020932.html) boots and work fine (ide, usb, ethernet, serial, keyboard and sound work normally).
Problems: - Filo loads a bzImage only from ide0 (ide1 doesn't work yet). - Video doesn't work, yet.
Signed-off-by: Nikolay Petukhov nikolay.petukhov@gmail.com Acked-by: Uwe Hermann uwe@hermann-uwe.de
Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=hdama&... Configuration of artecgroup:dbe61 is still broken Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=e325&v... Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=e326&v... Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=juki-511p&... Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=dk8s2&... Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=dk8x&v...
If something broke during this checkin please be a pain in uwe's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, LinuxBIOS automatic build system