Well, sorry about the noise. I forgot to mention that most of the RAM init I found was in the raminit.c of each of the northbridge. Is there any other important file(s) that I missed?
Thanks,
Darmawan
On 2/20/12, Darmawan Salihun darmawan.salihun@gmail.com wrote:
Hi Ron,
I've been looking for DDR-SDRAM start-up tutorial. Is there any on the web outside of the JEDEC specs? Anyway, where are the codes located in the Coreboot source ? is it on the motherboard-specific codes?
TIA,
Darmawan
On 2/15/12, ron minnich rminnich@gmail.com wrote:
reading your note leads me to believe you are not familiar with how sdram startup works. It's a lot more than just setting one register.
ron
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
--
-= Human knowledge belongs to the world =-