Re: Intel Firmware Hubs

[Stefan Reinauer]

* Adam Agnew  [030728 01:31]:
> > any other flash part, it's just something in the electrical specs. SST
>
> I think you're right there. The datasheet for the 82802s shows that
> they're all 3.3v while a myriad of datasheets i found for other plcc flash
> parts were 5v. Good to know. It seems AMD offers a line of low voltage
> flash parts as SST must too. Thanks Steven.

the 49* types should all be 3.3v as well. but i am not sure the pinout
is the same..

Stefan