On Fri, Oct 12, 2007 at 11:05:54AM +0200, Juergen Beisert wrote:
On Friday 12 October 2007 03:40, Peter Stuge wrote:
On Thu, Oct 11, 2007 at 08:31:18AM +0200, Juergen Beisert wrote:
- Any ideas about the smartcard reader? Does it need special init in LinuxBIOS?
No.
But activating COM2 at least will be required, I guess? It's active in the original BIOS (appears in /proc/ioports).
I did not find any documentation about the used device. I only know its connected through the UART2 with TTL levels.
Can you guys find a chip name? Maybe take a photo of the main chip on the card reader board.
On the device (U1): IMT-S001-1 425 009B100
Juergen, can you post 'lsmod' and 'ps auxw' in the original version of the BIOS/DoC software? Maybe also a dmesg (full boot log). My guess is that the card readers worked with their software, and as that's Linux-based maybe we just have to find the correct driver name?
I can't seem to find a button where I can put the box into upgrade mode in order to get a shell. The settings screen is password protected on my box, that may be the reason. I'll see if I can work around that.
Uwe.