Sven Schnelle (svens@stackframe.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1103
-gerrit
commit 8b6008f20e6a1aaed4512e4a506b7c49a945ba0b Author: Sven Schnelle svens@stackframe.org Date: Sun Jun 17 14:23:35 2012 +0200
i5000: enforce hard reset
Not doing a hard reset leaves the BOFL0 register cleared, which prevents the BSP selection from working. To make sure we start with known values, use the SPAD0 register for soft reset detection. If there's a value other than 0, do a hard reset.
Change-Id: I390e3208084cfd32d73cce439ddf2bc9d4436a62 Signed-off-by: Sven Schnelle svens@stackframe.org --- src/northbridge/intel/i5000/halt_second_bsp.S | 31 ++++++++++++++++++++++++- 1 files changed, 30 insertions(+), 1 deletions(-)
diff --git a/src/northbridge/intel/i5000/halt_second_bsp.S b/src/northbridge/intel/i5000/halt_second_bsp.S index a1a1b15..2dc533a 100644 --- a/src/northbridge/intel/i5000/halt_second_bsp.S +++ b/src/northbridge/intel/i5000/halt_second_bsp.S @@ -2,6 +2,26 @@
movl %eax, %ebp
+ /* check if SPAD0 is cleared. If yes, it means this was a hard reset */ + movl $0x800080d0, %eax + movw $0xcf8, %dx + outl %eax, %dx + + addw $4, %dx + inl %dx, %eax + cmp $0, %eax + je no_reset + + /* perform hard reset */ + movw $0xcf9, %dx + movw $0x06, %ax + outw %ax, %dx + +loop0: hlt + jmp loop + +no_reset: + /* Read the semaphore register of i5000 (BOFL0). If it returns zero, it means there was already another read by another CPU */ @@ -25,5 +45,14 @@ loop: hlt jmp loop
-1: /* Restore BIST */ +1: /* set magic value for soft reset detection */ + movl $0x800080d0, %eax + movw $0xcf8, %dx + outl %eax, %dx + + addw $4, %dx + movl $0x12345678, %eax + outl %eax, %dx + + /* Restore BIST */ mov %ebp, %eax