Martin Roth (martin.roth@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2179
-gerrit
commit 6d82f8005a30f931d6e476d4f6fd44e718bd93aa Author: Martin Roth martin.roth@se-eng.com Date: Mon Jan 21 19:33:22 2013 -0700
Hudson: Lecacy free question is hudson only
The "system is legacy free" question accidentally escaped from the hudson Kconfig where it was intended to stay and went coreboot-wide. This puts it back inside the boundries of the hudson southbridge where it belongs.
I also commented the endif statements to make it easier to tell where things belong.
Change-Id: I49f7a5eadb96d40c6101a93bc390e644617a5654 Signed-off-by: Martin Roth martin.roth@se-eng.com --- src/southbridge/amd/agesa/hudson/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig index 3a97e60..92e5960 100644 --- a/src/southbridge/amd/agesa/hudson/Kconfig +++ b/src/southbridge/amd/agesa/hudson/Kconfig @@ -105,7 +105,7 @@ config HUDSON_FWM_POSITION 0xFFC20000 if flash chip size is 4M 0xFF820000 if flash chip size is 8M 0xFF020000 if flash chip size is 16M -endif +endif # HUDSON_FWM
choice prompt "SATA Mode" @@ -175,7 +175,7 @@ config AHCI_ROM_FILE string "AHCI ROM path and filename" depends on HUDSON_AHCI_ROM default "src/southbridge/amd/agesa/hudson/ahci.bin" -endif +endif # HUDSON_SATA_AHCI || HUDSON_SATA_AHCI7804
if HUDSON_SATA_RAID config RAID_ROM_ID @@ -202,7 +202,7 @@ config RAID_MISC_ROM_POSITION The RAID ROM requires that the MISC ROM is located between the range 0xFFF0_0000 to 0xFFF0_FFFF. Also, it must 1K bytes aligned. The CONFIG_ROM_SIZE must larger than 0x100000. -endif +endif # HUDSON_SATA_RAID
config S3_VOLATILE_POS hex "S3 volatile storage position" @@ -212,10 +212,10 @@ config S3_VOLATILE_POS For a system with S3 feature, the BIOS needs to save some data to non-volitile storage at cold boot stage.
-endif - config HUDSON_LEGACY_FREE bool "System is legacy free" help Select y if there is no keyboard controller in the system. This sets variables in AGESA and ACPI. + +endif # SOUTHBRIDGE_AMD_AGESA_HUDSON