Attaching logs: cbmem -1 > https://del.dog/raw/cbmemlog lspci -vvxxx > https://del.dog/raw/sd-mmc-not-fw
On 08.04.2020 13:45, AreYouLoco? wrote:
I can confirm that my Firewire controller with coreboot is detected as MMC/SD Controller. The same situation as yours so seems like a bug.
I tried Debian and Ubuntu Studio both detect it as SD/MMC Controller. It gets detected correctly on stock BIOS. Devs?
On 08.04.2020 13:22, Alesandar Metodiev wrote:
AreYouLoco, I am really glad to see there is someone else who is interested in this. If necessary, I will provide the coreboot config in a few hours, but it was nothing special. It was built from master and I have simply selected mainboard vendor/model, checked /Use CMOS for configuration values /and increased /Size of CBFS/ up to 0x300000.
In the meanwhile, here's my only lspci entry related to Ricoh: https://del.dog/lspci_ricoh_coreboot.txt
I believe that /src/mainboard/lenovo/t420/devicetree.cb/ (around line 85) has a statement related to that controller, but I will have to take a closer look at the coreboot source-code.
device pci 1c.4 on chip drivers/ricoh/rce822 register "sdwppol" = "1" register "disable_mask" = "0x87" device pci 00.0 on end end end # PCIe Port #5 (Ricoh SD & FW)On Wed, Apr 8, 2020 at 1:05 PM AreYouLoco? <areyouloco@paranoici.org mailto:areyouloco@paranoici.org> wrote:
On stock latest firmware and ubuntu studio I do see this: https://del.dog/raw/firewire_lspci I just builded coreboot. Backing up stock and trying to see if it's detected with coreboot. Fingers crossed! On April 8, 2020 9:15:22 AM UTC, Paul Menzel <pmenzel@molgen.mpg.de <mailto:pmenzel@molgen.mpg.de>> wrote: >Dear AreYouLoco, > > >Am 08.04.20 um 10:59 schrieb AreYouLoco?: > >> I am in the same situation. Same board and same controller. Still >> didn't flash coreboot but I also want to make FW work with coreboot. >> Could you please share your coreboot build config? Did you build >> master repo? >> >> Thanks. I am also willing to test images and configs to make that >> setup work. > >So, as you still running the vendor firmware, does this setup, >especially the FireWire/USB controller (40GAB5809-G200), work with the >vendor firmware? If so, please share the Linux messages and attach the >output of `sudo lspci -vvxxx`. > > >Kind regards, > >Paul >_______________________________________________ >coreboot mailing list -- coreboot@coreboot.org <mailto:coreboot@coreboot.org> >To unsubscribe send an email to coreboot-leave@coreboot.org <mailto:coreboot-leave@coreboot.org>