10 May
2007
10 May
'07
8:38 p.m.
This patch removes cmos.layout and auto.inc from the Norwich mainboard directory. It also fixes the dependency in Config.lb on option_table.h which includes cmos.layout.
Signed-off-by: Marc Jones marc.jones@amd.com
--
Marc Jones
Senior Software Engineer
(970) 226-9684 Office
mailto:Marc.Jones@amd.com
http://www.amd.com/embeddedprocessors
Index: LinuxBIOSv2/src/mainboard/amd/norwich/Config.lb
===================================================================
--- LinuxBIOSv2.orig/src/mainboard/amd/norwich/Config.lb 2007-05-09 17:02:51.000000000 -0600
+++ LinuxBIOSv2/src/mainboard/amd/norwich/Config.lb 2007-05-09 17:03:13.000000000 -0600
@@ -55,7 +55,7 @@
if USE_DCACHE_RAM
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ depends "$(MAINBOARD)/cache_as_ram_auto.c"
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
Index: LinuxBIOSv2/src/mainboard/amd/norwich/cmos.layout
===================================================================
--- LinuxBIOSv2.orig/src/mainboard/amd/norwich/cmos.layout 2007-05-09 16:56:28.000000000 -0600
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,75 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 1 e 0 dcon_present
-1008 16 h 0 check_sum
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-
-checksums
-
-checksum 392 1007 1008
-
-
Index: LinuxBIOSv2/src/mainboard/amd/norwich/auto.c
===================================================================
--- LinuxBIOSv2.orig/src/mainboard/amd/norwich/auto.c 2007-05-10 11:22:28.000000000 -0600
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,106 +0,0 @@
-/*
- * This file is part of the LinuxBIOS project.
- *
- * Copyright (C) 2007 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <arch/hlt.h>
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "cpu/x86/bist.h"
-#include "cpu/x86/msr.h"
-#include <cpu/amd/lxdef.h>
-#include <cpu/amd/geode_post_code.h>
-#include "southbridge/amd/cs5536/cs5536.h"
-
-#define POST_CODE(x) outb(x, 0x80)
-
-#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
-#include "southbridge/amd/cs5536/cs5536_early_setup.c"
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#define ManualConf 0 /* Do automatic strapped PLL config */
-#define PLLMSRhi 0x00001490 /* manual settings for the PLL */
-#define PLLMSRlo 0x02000030
-#define DIMM0 0xA0
-#define DIMM1 0xA2
-#include "northbridge/amd/lx/raminit.h"
-#include "northbridge/amd/lx/pll_reset.c"
-#include "northbridge/amd/lx/raminit.c"
-#include "sdram/generic_sdram.c"
-#include "cpu/amd/model_lx/cpureginit.c"
-#include "cpu/amd/model_lx/syspreinit.c"
-
-static void msr_init(void)
-{
- /* Setup access to the MC for low memory. Note MC not setup yet. */
- __builtin_wrmsr(CPU_RCONF_DEFAULT, 0x10f3bf00, 0x24fffc02);
-
- __builtin_wrmsr(MSR_GLIU0 + 0x20, 0xfff80, 0x20000000);
- __builtin_wrmsr(MSR_GLIU0 + 0x21, 0x80fffe0, 0x20000000);
-
- __builtin_wrmsr(MSR_GLIU1 + 0x20, 0xfff80, 0x20000000);
- __builtin_wrmsr(MSR_GLIU1 + 0x21, 0x80fffe0, 0x20000000);
-}
-
-static void mb_gpio_init(void)
-{
- /* Early mainboard specific GPIO setup */
-}
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller memctrl [] = {
- {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
- };
-
- SystemPreInit();
- msr_init();
-
- cs5536_early_setup();
-
- /* NOTE: must do this AFTER the early_setup!
- * it is counting on some early MSR setup
- * for cs5536
- */
- /* cs5536_disable_internal_uart disable them for now, set them up later...*/
- cs5536_setup_onchipuart(); /* if debug. real setup done in chipset init via config.lb */
- mb_gpio_init();
- uart_init();
- console_init();
-
- pll_reset(ManualConf);
-
- cpuRegInit();
-
- sdram_initialize(1, memctrl);
-
- /* Check all of memory */
- //ram_check(0x00000000, 640*1024);
-}