[LinuxBIOS] RES: RES: Rumba target and AMD RDK THINCLIENT

[Jardel Silveira]

Dear Li-Ta Lo,

I´ve just tried to compile rumba now and i´ve got this ouputÇ

N_OFFSET='0x0' -DXIP_ROM_SIZE='0x10000' -DXIP_ROM_BASE='0xfffd0000'
-DCONFIG_UDELAY_TSC='1' -DCONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2='0'
-DCONFIG_UDELAY_IO='0'
/home/jardel/projetos/LinuxBIOSv2/src/mainboard/amd/rumba/auto.c -o auto.inc
raminit.c:3.61:
struct mem_controller undeclared
make[1]: ** [auto.inc] Erro 1
make[1]: Leaving directory
`/home/jardel/projetos/LinuxBIOSv2/targets/amd/rumba/rumba/normal'
make: ** [normal/linuxbios.rom] Erro 1
jardel@jardel:~/projetos/LinuxBIOSv2/targets/amd/rumba/rumba$ ls

Thanks.

Jardel.

-----Mensagem original-----
De: [e-mail] [mailto:[e-mail]]
Em nome de Li-Ta Lo
Enviada em: quinta-feira, 23 de fevereiro de 2006 18:44
Para: Jardel Silveira
Cc: [e-mail]
Assunto: Re: [LinuxBIOS] RES: Rumba target and AMD RDK THINCLIENT

On Wed, 2006-02-22 at 15:12 -0300, Jardel Silveira wrote:
> Dear,
>
> As a matter of fact, this target doesn´t seem to turn on my board.
> The power led is off.
>    I´ve an FS2 JTAG interface and may be I can do some necessary tests.

I just committed the raminit.c for GX2. Please take a look at it. I 
presume you have access to the developer web site and docs there?

I think I have implemented the DRAM init sequence in their GeodeROM
Porting Guide and LX/GX processor data book correctly. But I may be
wrong. I also thing probably I have to implement the PLL reset in
order for DRAM to work.

BTW, hook a serial console. I think the power led is controlled by
software. It is off all the way in LinuxBIOS (yes, there is something
on the serial console.)