Same thing, with one small difference... I turned debugging on and this is what I get :
find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8f find_ide_controller: primary channel: native PCI mode find_ide_controller: cmd_base=0x0 ctrl_base=0x0 ide_software_reset: Waiting for ide0 to become ready for reset.. ok init_drive: Testing for hda init_drive: Probing for hda Invalid IDE Configuration: 7ed8 <-- this line used to be 3ed8 with my previous conf init_drive: Testing for hda init_drive: Probing for hda print_status: IDE: status=0xa1, err=0x0 Drive 0 does not exist
boot:
Also the first time I compiled filo and the rom, it halted at the elfboot screen, then I recompiled with the same settings, and filo loaded.. strange..
Luc
Ronald G. Minnich wrote:
try this one
ron p.s. make sure you do the make config or whatever it is to remake all the files that depend on defconf
# !!! NOTE !!! # Do NOT add spaces or comments at the end of option lines. # It confuses some versions of make.
# Image filename for automatic boot and optional command line parameter AUTOBOOT_FILE = "hda1:/vmlinuz-normal initrd=hda1:/initrd-normal.gz root=/dev/ram0 console=ttyS0,115200"
# Time in second before booting AUTOBOOT_FILE AUTOBOOT_DELAY = 2
# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus IDE_DISK = 1
# VGA text console VGA_CONSOLE = 1 PC_KEYBOARD = 1
# Serial console SERIAL_CONSOLE = 1 SERIAL_IOBASE = 0x3f8 SERIAL_SPEED = 115200
# Filesystems FSYS_EXT2FS = 1 FSYS_FAT = 0 FSYS_JFS = 0 FSYS_MINIX = 0 FSYS_REISERFS = 0 FSYS_XFS = 0 FSYS_ISO9660 = 0
# Support for boot disk image in bootable CD-ROM (El Torito) ELTORITO = 0
# PCI support SUPPORT_PCI = 1
# Enable this if not all PCI buses are scanned (you can see it with DEBUG_PCI) # K8-based boards may need it PCI_BRUTE_SCAN = 1 PCI_BRUTE_SCAN_LIMIT = 2 PCI_BRUTE_SCAN_START = 1 IDE_HINT_BUS=1 IDE_HINT_DEV=4 IDE_HINT_FUNC=1
# Sound support (needs SUPPORT_PCI) #SUPPORT_SOUND = 1
# Sound drivers #VIA_SOUND = 1
# Debugging #DEBUG_ALL = 1 #DEBUG_ELFBOOT = 1 #DEBUG_ELFNOTE = 1 #DEBUG_LINUXBIOS = 1 #DEBUG_MALLOC = 1 #DEBUG_MULTIBOOT = 1 #DEBUG_SEGMENT = 1 #DEBUG_SYS_INFO = 1 #DEBUG_TIMER = 1 #DEBUG_BLOCKDEV = 1 #DEBUG_PCI = 1 #DEBUG_VIA_SOUND = 1 #DEBUG_LINUXLOAD = 1 #DEBUG_IDE = 1 #DEBUG_ELTORITO = 1