Cristian Craciunescu wrote:
I've compiled suport for j8f9 board from jetw. using as template other LX mainboard. The system is booting with coreboot/seabios however the serial does not seam to work in kernel. GRUB bootloader works ok over serial but as soon as the linux kernel finish booting it does not respond over serial but it can send messages to serial. Although the IRQs are detected correctly when the serial has input I can not see any irq messages incrementing in /proc/interrupts. Any hint?
Something is wrong with the interrupt setup in coreboot if they are not being delivered to the kernel.
Are you using the internal UART in CS5536 or do you have a superio? Which board did you use as template? Can you post a patch with your code so far?
//Peter