Patrick Georgi (patrick@georgi-clan.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1227
-gerrit
commit 109481e06febb3f1b1475f087b2dcd2d0e7e3b0a Author: Patrick Georgi patrick@georgi-clan.de Date: Fri Jul 13 19:06:22 2012 +0200
amd/lx: Move configuration from source to Kconfig
LX has two values that are usually automatically derived but can be overridden, that were so far defined in each board's romstage.
These values, along with the toggle to enable override are now part of LX's Kconfig. For boards that gave values but requested autogeneration, the values are removed.
Further improvements: Figure out the various fields in PLLMSRlo and make them sensible Kconfig options (instead of the hex value it is now)
Change-Id: I8a17c89e4a3cb1b52aaceef645955ab7817b482d Signed-off-by: Patrick Georgi patrick@georgi-clan.de --- src/mainboard/aaeon/pfm-540i_revb/romstage.c | 6 +--- src/mainboard/amd/db800/romstage.c | 6 +--- src/mainboard/amd/norwich/romstage.c | 6 +--- src/mainboard/artecgroup/dbe61/romstage.c | 8 +----- src/mainboard/bachmann/ot200/Kconfig | 6 ++++ src/mainboard/bachmann/ot200/romstage.c | 4 --- src/mainboard/digitallogic/msm800sev/romstage.c | 6 +--- src/mainboard/iei/pcisa-lx-800-r10/Kconfig | 6 ++++ src/mainboard/iei/pcisa-lx-800-r10/romstage.c | 10 +------ src/mainboard/iei/pm-lx-800-r11/Kconfig | 19 +++---------- src/mainboard/iei/pm-lx-800-r11/romstage.c | 10 ------- src/mainboard/lippert/hurricane-lx/Kconfig | 6 ++++ src/mainboard/lippert/hurricane-lx/romstage.c | 4 --- src/mainboard/lippert/literunner-lx/Kconfig | 6 ++++ src/mainboard/lippert/literunner-lx/romstage.c | 4 --- src/mainboard/lippert/roadrunner-lx/Kconfig | 6 ++++ src/mainboard/lippert/roadrunner-lx/romstage.c | 4 --- src/mainboard/lippert/spacerunner-lx/Kconfig | 6 ++++ src/mainboard/lippert/spacerunner-lx/romstage.c | 4 --- src/mainboard/pcengines/alix1c/romstage.c | 6 +--- src/mainboard/pcengines/alix2d/romstage.c | 6 +--- src/mainboard/traverse/geos/Kconfig | 6 ++++ src/mainboard/traverse/geos/romstage.c | 4 --- src/mainboard/winent/pl6064/romstage.c | 6 +--- src/northbridge/amd/lx/Kconfig | 31 ++++++++++++++++++++++- src/northbridge/amd/lx/pll_reset.c | 8 +++--- 26 files changed, 90 insertions(+), 104 deletions(-)
diff --git a/src/mainboard/aaeon/pfm-540i_revb/romstage.c b/src/mainboard/aaeon/pfm-540i_revb/romstage.c index 4b510a9..2d3b71d 100644 --- a/src/mainboard/aaeon/pfm-540i_revb/romstage.c +++ b/src/mainboard/aaeon/pfm-540i_revb/romstage.c @@ -47,10 +47,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) return smbus_read_byte(device, address); }
-#define ManualConf 0 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x000005DD /* Manual settings for the PLL */ -#define PLLMSRlo 0x00DE60EE - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -79,7 +75,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/amd/db800/romstage.c b/src/mainboard/amd/db800/romstage.c index 3590c37..2bb6cd3 100644 --- a/src/mainboard/amd/db800/romstage.c +++ b/src/mainboard/amd/db800/romstage.c @@ -41,10 +41,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) return smbus_read_byte(device, address); }
-#define ManualConf 0 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x000005DD /* Manual settings for the PLL */ -#define PLLMSRlo 0x00DE60EE - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -74,7 +70,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/amd/norwich/romstage.c b/src/mainboard/amd/norwich/romstage.c index d8fca5a..c71b31f 100644 --- a/src/mainboard/amd/norwich/romstage.c +++ b/src/mainboard/amd/norwich/romstage.c @@ -38,10 +38,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) return smbus_read_byte(device, address); }
-#define ManualConf 0 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x00001490 /* manual settings for the PLL */ -#define PLLMSRlo 0x02000030 - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -75,7 +71,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/artecgroup/dbe61/romstage.c b/src/mainboard/artecgroup/dbe61/romstage.c index f97af92..61bd03e 100644 --- a/src/mainboard/artecgroup/dbe61/romstage.c +++ b/src/mainboard/artecgroup/dbe61/romstage.c @@ -51,12 +51,6 @@ static int spd_read_byte(unsigned device, unsigned address) return 0xFF; }
-#define ManualConf 0 /* Do automatic strapped PLL config */ -/* CPU and GLIU mult/div 500/266*/ -#define PLLMSRhi 0x0000039C /* 33MHz PCI, 0x000003DD for 66MHz PCI */ -/* Hold Count - how long we will sit in reset */ -#define PLLMSRlo 0x00DE6000 - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -94,7 +88,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/bachmann/ot200/Kconfig b/src/mainboard/bachmann/ot200/Kconfig index a201bde..5d185c0 100644 --- a/src/mainboard/bachmann/ot200/Kconfig +++ b/src/mainboard/bachmann/ot200/Kconfig @@ -12,6 +12,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy select BOARD_ROMSIZE_KB_2048 select POWER_BUTTON_DEFAULT_DISABLE select DRIVERS_I2C_IDREG + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_266
config MAINBOARD_DIR string @@ -25,4 +27,8 @@ config IRQ_SLOT_COUNT int default 6
+config PLLMSRlo + hex + default 0x07de001e + endif # BOARD_BACHMANN_OT200 diff --git a/src/mainboard/bachmann/ot200/romstage.c b/src/mainboard/bachmann/ot200/romstage.c index 9edd5f7..fbe4bd7 100644 --- a/src/mainboard/bachmann/ot200/romstage.c +++ b/src/mainboard/bachmann/ot200/romstage.c @@ -39,10 +39,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) return smbus_read_byte(device, address); }
-#define ManualConf 1 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x0000039c /* CPU 500 MHz - GLIU 266 MHz */ -#define PLLMSRlo 0x07de001e - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" diff --git a/src/mainboard/digitallogic/msm800sev/romstage.c b/src/mainboard/digitallogic/msm800sev/romstage.c index d30e2b0..caafd2f 100644 --- a/src/mainboard/digitallogic/msm800sev/romstage.c +++ b/src/mainboard/digitallogic/msm800sev/romstage.c @@ -22,10 +22,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); }
-#define ManualConf 0 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x00001490 /* manual settings for the PLL */ -#define PLLMSRlo 0x02000030 - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -57,7 +53,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig index eae72ae..69e106e 100644 --- a/src/mainboard/iei/pcisa-lx-800-r10/Kconfig +++ b/src/mainboard/iei/pcisa-lx-800-r10/Kconfig @@ -11,6 +11,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy select PIRQ_ROUTE select BOARD_ROMSIZE_KB_256 select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_266
config MAINBOARD_DIR string @@ -24,4 +26,8 @@ config IRQ_SLOT_COUNT int default 9
+config PLLMSRlo + hex + default 0x00DE6000 + endif # BOARD_IEI_PCISA_LX_800_R10 diff --git a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c index aec9843..7bd1b74 100644 --- a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c +++ b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c @@ -41,14 +41,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) return smbus_read_byte(device, address); }
-#define ManualConf 1 /* Do automatic strapped PLL config */ -//#define PLLMSRhi 0x0000059C /* CPU and GLIU mult/div 500/400*/ -//#define PLLMSRhi 0x0000049C /* CPU and GLIU mult/div 500/333*/ -#define PLLMSRhi 0x0000039C /* CPU and GLIU mult/div 500/266*/ -//0x0000059C 0000 0000 0000 0000 0000 |0101 1|0|01 110|0 -/* Hold Count - how long we will sit in reset */ -#define PLLMSRlo 0x00DE6000 - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -78,7 +70,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/iei/pm-lx-800-r11/Kconfig b/src/mainboard/iei/pm-lx-800-r11/Kconfig index a897106..e443c6c 100644 --- a/src/mainboard/iei/pm-lx-800-r11/Kconfig +++ b/src/mainboard/iei/pm-lx-800-r11/Kconfig @@ -32,6 +32,8 @@ config BOARD_SPECIFIC_OPTIONS select PIRQ_ROUTE select BOARD_ROMSIZE_KB_512 select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_266
config MAINBOARD_DIR string @@ -45,19 +47,8 @@ config IRQ_SLOT_COUNT int default 7
-choice - prompt "Core/GLIU Frequency" - default CORE_GLIU_500_266 - -config CORE_GLIU_500_266 - bool "500MHz / 266MHz" - -config CORE_GLIU_500_333 - bool "500MHz / 333MHz" - -config CORE_GLIU_500_400 - bool "500MHz / 400MHz" - -endchoice +config PLLMSRlo + hex + default 0x07de0000
endif # BOARD_IEI_PM_LX_800_R11 diff --git a/src/mainboard/iei/pm-lx-800-r11/romstage.c b/src/mainboard/iei/pm-lx-800-r11/romstage.c index f756622..57a9fc6 100644 --- a/src/mainboard/iei/pm-lx-800-r11/romstage.c +++ b/src/mainboard/iei/pm-lx-800-r11/romstage.c @@ -46,16 +46,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) return smbus_read_byte(device, address); }
-#if CONFIG_CORE_GLIU_500_400 -# define PLLMSRhi 0x0000059c -#elif CONFIG_CORE_GLIU_500_333 -# define PLLMSRhi 0x0000049c -#else -# define PLLMSRhi 0x0000039c -#endif - -#define PLLMSRlo 0x07de000 - #include <northbridge/amd/lx/raminit.h> #include <northbridge/amd/lx/pll_reset.c> #include <northbridge/amd/lx/raminit.c> diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig index 118809d..64e1631 100644 --- a/src/mainboard/lippert/hurricane-lx/Kconfig +++ b/src/mainboard/lippert/hurricane-lx/Kconfig @@ -13,6 +13,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy # Board is equipped with a 1 MB SPI flash, however, due to limitations # of the IT8712F Super I/O, only the top 512 KB are directly mapped. select BOARD_ROMSIZE_KB_512 + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_333
config MAINBOARD_DIR string @@ -50,4 +52,8 @@ config ONBOARD_UARTS_RS485 If selected, both on-board serial ports will operate in RS485 mode instead of RS232.
+config PLLMSRlo + hex + default 0x00de6001 + endif # BOARD_LIPPERT_HURRICANE_LX diff --git a/src/mainboard/lippert/hurricane-lx/romstage.c b/src/mainboard/lippert/hurricane-lx/romstage.c index 29aa9d1..78188bb 100644 --- a/src/mainboard/lippert/hurricane-lx/romstage.c +++ b/src/mainboard/lippert/hurricane-lx/romstage.c @@ -40,10 +40,6 @@ /* Bit0 enables Spread Spectrum. */ #define SMC_CONFIG 0x01
-#define ManualConf 1 /* No automatic strapped PLL config */ -#define PLLMSRhi 0x0000049C /* Manual settings for the PLL */ -#define PLLMSRlo 0x00DE6001 - static inline int spd_read_byte(unsigned int device, unsigned int address) { if (device != DIMM0) diff --git a/src/mainboard/lippert/literunner-lx/Kconfig b/src/mainboard/lippert/literunner-lx/Kconfig index 12a3ae1..c4684c9 100644 --- a/src/mainboard/lippert/literunner-lx/Kconfig +++ b/src/mainboard/lippert/literunner-lx/Kconfig @@ -15,6 +15,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy # of the IT8712F Super I/O, only the top 512 KB are directly mapped. select BOARD_ROMSIZE_KB_512 select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_400
config MAINBOARD_DIR string @@ -42,4 +44,8 @@ config ONBOARD_IDE_SLAVE If selected, the on-board Compact Flash card socket will act as IDE Slave instead of Master.
+config PLLMSRlo + hex + default 0x00de6001 + endif # BOARD_LIPPERT_LITERUNNER_LX diff --git a/src/mainboard/lippert/literunner-lx/romstage.c b/src/mainboard/lippert/literunner-lx/romstage.c index 1e82bdb..b80c7ca 100644 --- a/src/mainboard/lippert/literunner-lx/romstage.c +++ b/src/mainboard/lippert/literunner-lx/romstage.c @@ -44,10 +44,6 @@ #define SMC_CONFIG 0x01 #endif
-#define ManualConf 1 /* No automatic strapped PLL config */ -#define PLLMSRhi 0x0000059C /* Manual settings for the PLL */ -#define PLLMSRlo 0x00DE6001 - static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type diff --git a/src/mainboard/lippert/roadrunner-lx/Kconfig b/src/mainboard/lippert/roadrunner-lx/Kconfig index 2d11b33..f5ec9b9 100644 --- a/src/mainboard/lippert/roadrunner-lx/Kconfig +++ b/src/mainboard/lippert/roadrunner-lx/Kconfig @@ -14,6 +14,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy # SST 49LF008A is possible. select BOARD_ROMSIZE_KB_512 select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_333
config MAINBOARD_DIR string @@ -34,4 +36,8 @@ config ONBOARD_UARTS_RS485 If selected, both on-board serial ports will operate in RS485 mode instead of RS232.
+config PLLMSRlo + hex + default 0x00de6001 + endif # BOARD_LIPPERT_ROADRUNNER_LX diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c index 20e5b6a..e59e4fa 100644 --- a/src/mainboard/lippert/roadrunner-lx/romstage.c +++ b/src/mainboard/lippert/roadrunner-lx/romstage.c @@ -37,10 +37,6 @@ #include "southbridge/amd/cs5536/early_setup.c" #include "superio/ite/it8712f/early_serial.c"
-#define ManualConf 1 /* No automatic strapped PLL config */ -#define PLLMSRhi 0x0000049C /* Manual settings for the PLL */ -#define PLLMSRlo 0x00DE6001 - static inline int spd_read_byte(unsigned int device, unsigned int address) { if (device != DIMM0) diff --git a/src/mainboard/lippert/spacerunner-lx/Kconfig b/src/mainboard/lippert/spacerunner-lx/Kconfig index 99ecf7c..c4a2ce8 100644 --- a/src/mainboard/lippert/spacerunner-lx/Kconfig +++ b/src/mainboard/lippert/spacerunner-lx/Kconfig @@ -15,6 +15,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy # of the IT8712F Super I/O, only the top 512 KB are directly mapped. select BOARD_ROMSIZE_KB_512 select POWER_BUTTON_FORCE_ENABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_400
config MAINBOARD_DIR string @@ -41,4 +43,8 @@ config ONBOARD_IDE_SLAVE help If selected, the on-board SSD will act as IDE Slave instead of Master.
+config PLLMSRlo + hex + default 0x00de6001 + endif # BOARD_LIPPERT_SPACERUNNER_LX diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c index 9dcb37b..fca28c0 100644 --- a/src/mainboard/lippert/spacerunner-lx/romstage.c +++ b/src/mainboard/lippert/spacerunner-lx/romstage.c @@ -44,10 +44,6 @@ #define SMC_CONFIG 0x01 #endif
-#define ManualConf 1 /* No automatic strapped PLL config */ -#define PLLMSRhi 0x0000059C /* Manual settings for the PLL */ -#define PLLMSRlo 0x00DE6001 - static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I 0xFF, 0xFF, // only values used by Geode-LX raminit.c are set [SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type diff --git a/src/mainboard/pcengines/alix1c/romstage.c b/src/mainboard/pcengines/alix1c/romstage.c index f109031..9de3863 100644 --- a/src/mainboard/pcengines/alix1c/romstage.c +++ b/src/mainboard/pcengines/alix1c/romstage.c @@ -99,10 +99,6 @@ static u8 spd_read_byte(u8 device, u8 address) return spdbytes[address]; }
-#define ManualConf 0 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */ -#define PLLMSRlo 0x02000030 - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -132,7 +128,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/pcengines/alix2d/romstage.c b/src/mainboard/pcengines/alix2d/romstage.c index 0e8cc63..fd5582d 100644 --- a/src/mainboard/pcengines/alix2d/romstage.c +++ b/src/mainboard/pcengines/alix2d/romstage.c @@ -98,10 +98,6 @@ static u8 spd_read_byte(u8 device, u8 address) return spdbytes[address]; }
-#define ManualConf 0 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */ -#define PLLMSRlo 0x02000030 - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -156,7 +152,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/mainboard/traverse/geos/Kconfig b/src/mainboard/traverse/geos/Kconfig index 40679fe..3139d7d 100644 --- a/src/mainboard/traverse/geos/Kconfig +++ b/src/mainboard/traverse/geos/Kconfig @@ -11,6 +11,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy select UDELAY_TSC select BOARD_ROMSIZE_KB_1024 select POWER_BUTTON_DEFAULT_DISABLE + select PLL_MANUAL_CONFIG + select CORE_GLIU_500_400
config MAINBOARD_DIR string @@ -24,4 +26,8 @@ config IRQ_SLOT_COUNT int default 6
+config PLLMSRlo + hex + default 0x00de602e + endif # BOARD_TRAVERSE_GEOS diff --git a/src/mainboard/traverse/geos/romstage.c b/src/mainboard/traverse/geos/romstage.c index 588681b..50cc8fa 100644 --- a/src/mainboard/traverse/geos/romstage.c +++ b/src/mainboard/traverse/geos/romstage.c @@ -39,10 +39,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) return smbus_read_byte(device, address); }
-#define ManualConf 1 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x0000059C /* manual settings for the PLL */ -#define PLLMSRlo 0x00DE602E - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" diff --git a/src/mainboard/winent/pl6064/romstage.c b/src/mainboard/winent/pl6064/romstage.c index 6651acd..39e4ecf 100644 --- a/src/mainboard/winent/pl6064/romstage.c +++ b/src/mainboard/winent/pl6064/romstage.c @@ -43,10 +43,6 @@ static inline int spd_read_byte(unsigned int device, unsigned int address) return smbus_read_byte(device, address); }
-#define ManualConf 0 /* Do automatic strapped PLL config */ -#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */ -#define PLLMSRlo 0x02000030 - #include "northbridge/amd/lx/raminit.h" #include "northbridge/amd/lx/pll_reset.c" #include "northbridge/amd/lx/raminit.c" @@ -77,7 +73,7 @@ void main(unsigned long bist) /* Halt if there was a built in self test failure */ report_bist_failure(bist);
- pll_reset(ManualConf); + pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
diff --git a/src/northbridge/amd/lx/Kconfig b/src/northbridge/amd/lx/Kconfig index c1fea49..d74d715 100644 --- a/src/northbridge/amd/lx/Kconfig +++ b/src/northbridge/amd/lx/Kconfig @@ -2,7 +2,36 @@ config NORTHBRIDGE_AMD_LX bool select GEODE_VSA
+if NORTHBRIDGE_AMD_LX + config VIDEO_MB int default 8 - depends on NORTHBRIDGE_AMD_LX + +config PLL_MANUAL_CONFIG + bool + +if PLL_MANUAL_CONFIG + +# "Core/GLIU Frequency" +config CORE_GLIU_500_266 + bool # "500MHz / 266MHz" + +config CORE_GLIU_500_333 + bool # "500MHz / 333MHz" + +config CORE_GLIU_500_400 + bool # "500MHz / 400MHz" + +config PLLMSRhi + hex + default 0x39c if CORE_GLIU_500_266 + default 0x49c if CORE_GLIU_500_333 + default 0x59c if CORE_GLIU_500_400 + +config PLLMSRlo + hex + +endif + +endif diff --git a/src/northbridge/amd/lx/pll_reset.c b/src/northbridge/amd/lx/pll_reset.c index 3077b61..bf01e54 100644 --- a/src/northbridge/amd/lx/pll_reset.c +++ b/src/northbridge/amd/lx/pll_reset.c @@ -18,7 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-static void pll_reset(char manualconf) +static void pll_reset(void) { msr_t msrGlcpSysRstpll;
@@ -31,13 +31,13 @@ static void pll_reset(char manualconf)
if (!(msrGlcpSysRstpll.lo & (1 << RSTPLL_LOWER_SWFLAGS_SHIFT))) { printk(BIOS_DEBUG, "Configuring PLL.\n"); - if (manualconf) { + if (CONFIG_PLL_MANUAL_CONFIG) { post_code(POST_PLL_MANUAL); /* CPU and GLIU mult/div (GLMC_CLK = GLIU_CLK / 2) */ - msrGlcpSysRstpll.hi = PLLMSRhi; + msrGlcpSysRstpll.hi = CONFIG_PLLMSRhi;
/* Hold Count - how long we will sit in reset */ - msrGlcpSysRstpll.lo = PLLMSRlo; + msrGlcpSysRstpll.lo = CONFIG_PLLMSRlo; } else { /*automatic configuration (straps) */ post_code(POST_PLL_STRAP);