Hi there Ale, two suggestions: 1) check this thread - https://www.reddit.com/r/coreboot/comments/jdcn5y/latest_coreboot_for_the_as... , you may have to revert a specific commit for a fresher coreboot build 2) try to backport my XMP / custom RAM timings patch to KGPE-D16 related sources and then artificially raise the custom timings, hoping that would make your PC more bootable https://review.coreboot.org/q/topic:%22AMD_XMP%22+(status:open%20OR%20status...)
On Tue, Dec 22, 2020 at 4:48 PM Ale via coreboot coreboot@coreboot.org wrote:
Hello everyone, I have a kgpe d16 motherboard with coreboot and seabios, and 2 opteron 6282 SE processor with 64 gb of RAM: all the modules are 16 Gb hynix HMT42GR7AFR4C - RD and all are inserted into the orange slots. The problem is, if I add 2 additional modules, inside the last 2 orange slots, the machine doesn't starts and only black screen is shown, no log is detected over COM port. Any suggestion? Maybe another RAM module configuration is needed, because I read that 192 Gb of RAM is possible to obtain (I have followed the official Asus manual for the RAM-Slots configuration)
Thank you very much Best regards Ale _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org