David Broome wrote:
I would really like to get this workin but am not sure if my mobo supports it.
I answered the questions in the orger of the faq
Athlon 64 FX/Athlon 64 North Bridge NVIDIA nForce4 SLI Socket 939 (ABIT KN8 SLI Socket 939 NVIDIA nForce4 SLI ATX AMD)
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV42 [Geforce 6800 XT] (rev a2) 05:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 05:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Winbond W83627HF
Phoniex Bios D686 Bios
http://www.uabit.com/index.php?option=com_content&task=view&id=32&am...
Looking at the wiki, CK804 refers to the nforce Pro 2200, but this just might work anyways. I'd start by copying over the src/mainboard and src/target directory for the tyan s2891 to new folders, since it's very similar (just has an extra southbridge for PCI-X), remove that extra southbridge from Options.lb, then build it, flash it and see what happens. The usual disclaimer applies, make sure you're using an extra bios chip and not overwriting the factory bios, since linuxbios will overwrite everything including the factory bios' failsafe mechanism. Read over the wiki to find out what you'll need to get output, how to set up your payload, etc, and you probably won't have fully working vga the first time you boot it up. Any other questions, just ask, and good luck!
-Corey