Re: [coreboot] Coreboot doesn't boot on Arima HDAMA rev.G mainboard

[Joop Boonen]

On Tue, May 4, 2010 8:16 pm, Myles Watson wrote:
> On Tue, May 4, 2010 at 11:54 AM, Myles Watson  wrote:
> > > rev 4920 works without a problem, also with the extracted VGA. I get
> > > the
> > > FILO screen.
> >
> > Great.  You could check the values from Kconfig (build/config.h) and
> > compare
> > them to the values from 4920.  That would be the easiest thing to fix.
>
> I think the most likely culprit is SB_HT_CHAIN_ON_BUS0.  Could you
> change it to 1 in src/mainboard/arima/hdama/Kconfig, make oldconfig,
> and test?

I've tested it. I get the filo screen now.

When I do a probe I don't see any IDE device yet. Neither IDE nor SATA
SIL3114 drive. This also didn't work for version 4920.
> Thanks,
> Myles