Hi Andrew,
I am interested in getting coreboot running on the Wyse S50, and am also wondering if the VSA for the LX will work on these devices. Have you actually found source code for the GX2? Or only a compiled VSA?
Following Fijam's blog, and doing a lot of searching, I have managed to piece together the strange/old toolchain for making the VSA. Very detailed instructions are in my post:
http://www.coreboot.org/pipermail/coreboot/2014-January/076992.html
I can succesfully build the VSA, but haven't come as far as actually flashing a device and testing it out.
Is this the same toolchain that you use?
I hope you can keep us up to date with your progress, I know there are a few people who would love to get coreboot on their wyse devices. Personally, I plan to run NanoBSD on them, but am plagued with pci bus hangs under boot - a problem caused by the factory BIOS.
-Jamie
P.S. I also have a few spare S10 devices, so hopefully I can start testing soon as well
On 16-02-2014 20:08, andrew@cogman.info wrote:
Hi,
I'm fairly new at this and I'm trying to get coreboot and SeaBIOS working on a Wyse S10 and I've hit a problem and wondered if anyone can help.
I've compiled the reference toolchain and used that with the latest Git version and the one mentioned in Fijam's blog (http://fijam.eu.org/blog/how-to-put-coreboot-on-wyse-s30s50/) but they both stop at the same place.
I've obtained a copy of the GX2 VSA (through methods I probably can't mention here), but it's a different size to the one Fijam used? Is this a fault with the VSA or have I made a rookie mistake somewhere?
.config and bootlog attached.
Thanks, Andrew