Hi Mike, i hope i can help u i am just a User of coreboot and noo skilled coreboot hacker yet lol. The A10-6800K should work as its the same CPU core/ gen. do not include microcode it makes the rom a brick mode. U have to add a VGA bios if u are using the Internal GPU. i am using a F2A85M rev 1.1 (not pro and not LE, they are quite rare)
Am 2. November 2018 17:01:24 MEZ schrieb Mike Banon mikebdp2@gmail.com:
Nice report. Do you think A10-6800K CPU would have worked at this motherboard? Or only A8-6600K is supported? Also, what hardware revision of this motherboard do you have? (there were F2A85M / --//-- PRO and some other revisions, so I'm a bit confused) . I am seriously considering doing a similar build, but would like to get the fastest available CPU you could install there On Fri, Nov 2, 2018 at 4:29 AM kinky_nekoboi kinky_nekoboi@bluetardis.de wrote:
something like that happens if u connect anything to a USB2 Port
[ 2600.001601] usb 7-1: new full-speed USB device number 3 using
ohci-pci
[ 2600.001612] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.001619] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.001624] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.185864] usb 7-1: device descriptor read/64, error -11 [ 2600.293659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.293669] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.293674] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.477668] usb 7-1: device descriptor read/64, error -11 [ 2600.585647] usb usb7-port1: attempt power cycle [ 2601.090486] usb 7-1: new full-speed USB device number 4 using
ohci-pci
[ 2601.090494] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2601.301659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2601.509672] usb 7-1: device not accepting address 4, error -11 [ 2601.693678] usb 7-1: new full-speed USB device number 5 using
ohci-pci
[ 2601.693693] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2601.901677] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2602.109672] usb 7-1: device not accepting address 5, error -11 [ 2602.109723] usb usb7-port1: unable to enumerate USB device
Am 02.11.2018 um 02:01 schrieb kinky_nekoboi:
heeey
i am very happy that i have coreboot running now on my desktop
machine...
ADDON-GPU card works now
Nvramcui works
Optionrom execution works.
IOMMU does not work .. debian has to boot with iommu=off.
but KVM virtualsation works somehow.
Suspend does not work.
USB is still extremely buggy ... only the USB3 Ports are useable.
here some output
Architektur: x86_64 CPU Operationsmodus: 32-bit, 64-bit Byte-Reihenfolge: Little Endian CPU(s): 4 Liste der Online-CPU(s): 0-3 Thread(s) pro Kern: 2 Kern(e) pro Socket: 2 Sockel: 1 NUMA-Knoten: 1 Anbieterkennung: AuthenticAMD Prozessorfamilie: 21 Modell: 19 Modellname: AMD A8-6600K APU with Radeon(tm) HD
Graphics
Stepping: 1 CPU MHz: 2068.754 Maximale Taktfrequenz der CPU: 3900,0000 Minimale Taktfrequenz der CPU: 1900,0000 BogoMIPS: 7786.16 Virtualisierung: AMD-V L1d Cache: 16K L1i Cache: 64K L2 Cache: 2048K NUMA-Knoten0 CPU(s): 0-3 Markierungen: fpu vme de pse tsc msr pae mce cx8
apic
sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall
nx
mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl
nonstop_tsc
cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16
sse4_1
sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit
wdt
lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb hw_pstate ssbd vmmcall bmi1 arat npt lbrv svm_lock nrip_save
tsc_scale
vmcb_clean flushbyasid decodeassists pausefilter pfthreshold
23 entries total:
0:1st timestamp 13,116 1:start of romstage 13,477 (361) 2:before ram initialization 75,515
(62,038)
3:after ram initialization 1,308,025
(1,232,510)
4:end of romstage 1,319,893
(11,867)
8:starting to load ramstage 1,319,966 (73) 15:starting LZMA decompress (ignore for x86) 1,319,984 (18) 16:finished LZMA decompress (ignore for x86) 1,370,088
(50,103)
9:finished loading ramstage 1,370,357
(269)
10:start of ramstage 1,371,078
(720)
30:device enumeration 1,461,571
(90,493)
40:device configuration 1,470,758
(9,186)
50:device enable 1,501,692
(30,933)
60:device initialization 1,569,453
(67,761)
65:Option ROM initialization 1,769,162
(199,708)
65:Option ROM initialization 1,936,860
(167,697)
70:device setup done 2,011,094
(74,234)
75:cbmem post 2,366,967
(355,873)
80:write tables 2,371,915
(4,947)
85:finalize chips 2,750,289
(378,374)
90:load payload 2,755,411
(5,122)
15:starting LZMA decompress (ignore for x86) 2,797,472
(42,060)
16:finished LZMA decompress (ignore for x86) 2,823,100
(25,628)
99:selfboot jump 2,838,148
(15,048)
Total Time: 2,825,023
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot