Hi,
I am in the same situation. Same board and same controller. Still didn't flash coreboot but I also want to make FW work with coreboot. Could you please share your coreboot build config? Did you build master repo?
Thanks. I am also willing to test images and configs to make that setup work.
On April 8, 2020 6:23:27 AM UTC, Alesandar Metodiev alesandarmetodiev@gmail.com wrote:
Hello,
Recently I have decided to give a try to coreboot for first time and flashed my ThinkPad T420, but a few weeks ago I have swapped the USB controller on the back, next to the battery, with a FireWire/USB controller (40GAB5809-G200) from another T420. Nothing special, since some models have been shipped like this. The controller is no longer accessible on my laptop.
It seems like it may have been detected as an "SD Host Controller" or not detected at all. I will probably have to remove the chip and compare the output of lspci and lshw. If nothing has changed, I will probably have to return the stock BIOS and compare the results again. I have also tried to load some of the firewire kernel modules manually with modprobe.
The operating systems I have tested so far are Arch Linux and Xubuntu. I am willing to provide more useful information, boot into a fresh Windows install, flash the chip again or whatever else. Correct me if I am wrong, but if I go back to the stock BIOS, the next time I flash, I will have to disassemble the laptop again and otherwise I must be fine with flashing internally, right?
Thanks