Re: [LinuxBIOS] Added mainboard commell/lv671 and compile works, but ...

[Stefan Reinauer]

* Uwe Hermann  [070606 23:57]:
> Are you sure your hardware setup is working otherwise? Can you leave the
> null-modem cable attached as it is right now, but boot a normal Linux
> system on both ends of the cable? Then run minicom, 115200 BAUD on both
> sides, and test whether the trasmission itself works?

The south bridge code needs not only the SuperIO ports enabled but also
the COM1/COM2 ports. I think Corey's unified ICH code does this.