Check the Makefile.settings in the fallback directory and see if MAX_REBOOT_CNT is defined. If it isn't then there's some problem with the configuration. If it is, then it's not getting passed to the gcc command line.
Greg
On 08/04/2004, at 10:23 AM, Mathieu Deschamps wrote:
I'am building a new rom but now,I got stuck because of #error "MAX_REBOOT_CNT not defined" in make process of build target even though i defined this in Config.lb Here is a process trace :
####################################################################### if (cd fallback; \ make linuxbios.rom)\ then true; else exit 1; fi; make[1]: Entering directory `/home/root/projet-07042004/freebios/freebios2/build/epia/fallbac k' cp /home/root/projet/freebios/freebios2/src/arch/i386/config/crt0.base crt0.S gcc -no-gcc -x assembler-with-cpp -DASSEMBLY -E -I/home/root/projet/freebios/freebios2/src -D __ROMCC__=0 -D__ROMCC_MINOR__=38 -I/home/root/projet/freebios/freebios2/src/include -I/home/r oot/projet/freebios/freebios2/src/arch/i386/include -I/usr/lib/gcc-lib/i486-linux/egcs-2.91.6 6/include
/home/root/projet/freebios/freebios2/src/mainboard/via/epia/failover.c
./failover.E gcc: unrecognized option `-no-gcc' In file included from /home/root/projet/freebios/freebios2/src/mainboard/via/epia/failover.c: 7: /home/root/projet/freebios/freebios2/src/pc80/mc146818rtc_early.c:5: #error "MAX_REBOOT_CNT n ot defined" make[1]: *** [failover.E] Error 1 make[1]: Leaving directory `/home/root/projet-07042004/freebios/freebios2/build/epia/fallback ' make: *** [fallback-rom] Error 1 #################################################################
What is that pc80 directory in which it errors ? The parameter MAX_BOOT_CT is the counter that holds the survival of kernel messages after # boots, isn't it ?
I've also joined the Config file on which i haven't made much changes except what it asked for.
Please mail me a clue, just ask if you need moer info on the slab.
Thanks in advance.
################################################################ # Sample config file for EPIA # This will make a target directory of ./epia # # Change for experimentation MD # loadoptions
target epia
uses ARCH uses CONFIG_COMPRESS uses CONFIG_IOAPIC uses CONFIG_ROM_STREAM uses CONFIG_ROM_STREAM_START uses CONFIG_UDELAY_TSC uses CPU_FIXUP uses FALLBACK_SIZE uses HAVE_FALLBACK_BOOT uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses HAVE_HARD_RESET uses i586 uses i686 uses INTEL_PPRO_MTRR uses HEAP_SIZE uses IRQ_SLOT_COUNT uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses CONFIG_SMP uses CONFIG_MAX_CPUS uses MEMORY_HOLE uses PAYLOAD_SIZE uses _RAMBASE uses _ROMBASE uses ROM_IMAGE_SIZE uses ROM_SECTION_OFFSET uses ROM_SECTION_SIZE uses ROM_SIZE uses STACK_SIZE uses USE_FALLBACK_IMAGE uses USE_OPTION_TABLE uses HAVE_OPTION_TABLE uses MAXIMUM_CONSOLE_LOGLEVEL uses DEFAULT_CONSOLE_LOGLEVEL
# Sample config file for EPIA # This will make a target directory of ./epia # # Change for experimentation MD # loadoptions
target epia
uses ARCH uses CONFIG_COMPRESS uses CONFIG_IOAPIC uses CONFIG_ROM_STREAM uses CONFIG_ROM_STREAM_START uses CONFIG_UDELAY_TSC uses CPU_FIXUP uses FALLBACK_SIZE uses HAVE_FALLBACK_BOOT uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses HAVE_HARD_RESET uses i586 uses i686 uses INTEL_PPRO_MTRR uses HEAP_SIZE uses IRQ_SLOT_COUNT uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses CONFIG_SMP uses CONFIG_MAX_CPUS uses MEMORY_HOLE uses PAYLOAD_SIZE uses _RAMBASE uses _ROMBASE uses ROM_IMAGE_SIZE uses ROM_SECTION_OFFSET uses ROM_SECTION_SIZE uses ROM_SIZE uses STACK_SIZE uses USE_FALLBACK_IMAGE uses USE_OPTION_TABLE uses HAVE_OPTION_TABLE uses MAXIMUM_CONSOLE_LOGLEVEL uses DEFAULT_CONSOLE_LOGLEVE uses CONFIG_CONSOLE_SERIAL8250 uses MAINBOARD uses CONFIG_CHIP_CONFIGURE uses XIP_ROM_SIZE uses XIP_ROM_BASE uses LINUXBIOS_EXTRA_VERSION uses TTYS0_BAUD uses MAX_REBOOT_CNT
option TTYS0_BAUD=19200
option CONFIG_CHIP_CONFIGURE=1
option MAXIMUM_CONSOLE_LOGLEVEL=7 option DEFAULT_CONSOLE_LOGLEVEL=7 option CONFIG_CONSOLE_SERIAL8250=1
option CPU_FIXUP=1 option CONFIG_UDELAY_TSC=0 option i686=1 option i586=1 option INTEL_PPRO_MTRR=1 option ROM_SIZE=256*1024
option HAVE_OPTION_TABLE=1 option CONFIG_ROM_STREAM=1 option HAVE_FALLBACK_BOOT=1
# # More Options # option MAX_REBOOT_CNT=10
### ### Compute the location and size of where this firmware image ### (linuxBIOS plus bootloader) will live in the boot rom chip. ### option FALLBACK_SIZE=131072
## LinuxBIOS C code runs at this location in RAM option _RAMBASE=0x00004000
# ### ### Compute the start location and size size of ### The linuxBIOS bootloader. ###
# # Arima hdama romimage "normal" option USE_FALLBACK_IMAGE=0 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Normal" mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi end
romimage "fallback" option USE_FALLBACK_IMAGE=1 option ROM_IMAGE_SIZE=0x10000 option LINUXBIOS_EXTRA_VERSION=".0Fallback" mainboard via/epia # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf payload ../../../../../lnxieepro100.ebi end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios