my superio base adress is 0x370.
the debug show : handle_superio: port 0x0, defaultport 0x3f0 handle_superio: using port 0x3f0
in the Makefile.settings, i have : export SMC_BASE:=0x370
what's wrong ?
Hi,
thanks for all, the compile works now. I used the redhat 7.1. with Debian stable (woody) it works also.
Now i try to use the romimage with my stpc elite board but it hangs after: Call init Enabling com device: 04 iobase = 0x03f8 irq=4
after this some strange character ... On my stpc elite card, i have only 2 serial ports, no floppy, no parallel port. Maybe something goes wrong with this ...
i try to use NO_KEYBOARD option set to 1 and MUST_ENABLE_FLOPPY option set to 0 but no change.
if someone have an idea ..., now i'm looking into the sources.
Best regards
-- Fathi