[coreboot] r1037 - coreboot-v3/mainboard/artecgroup/dbe62

Author: mraudsepp
Date: 2008-11-17 11:31:40 +0100 (Mon, 17 Nov 2008)
New Revision: 1037

Modified:
   coreboot-v3/mainboard/artecgroup/dbe62/initram.c
Log:
artecgroup/dbe62: Remove old memory setup related commented out calls and touch up a comment.

I see no reason to have these memory work related debug calls commented out in the code, everyone should know what to locally temporarily add to debug this.

Signed-off-by: Mart Raudsepp 
Acked-by: Peter Stuge

Modified: coreboot-v3/mainboard/artecgroup/dbe62/initram.c
===================================================================
--- coreboot-v3/mainboard/artecgroup/dbe62/initram.c	2008-11-16 22:59:52 UTC (rev 1036)
+++ coreboot-v3/mainboard/artecgroup/dbe62/initram.c	2008-11-17 10:31:40 UTC (rev 1037)
@@ -116,15 +116,13 @@
 }

/** 
-  * main for initram for the PC Engines Alix 1C.  It might seem that you
-  * could somehow do these functions in, e.g., the cpu code, but the
+  * main for initram for the Artec Group ThinCan DBE62. It might seem that
+  * you could somehow do these functions in, e.g., the cpu code, but the
   * order of operations and what those operations are is VERY strongly
   * mainboard dependent. It's best to leave it in the mainboard code.
   */
 int main(void)
 {
-	void dumplxmsrs(void);
-
    printk(BIOS_DEBUG, "Hi there from stage1\n");
    post_code(POST_START_OF_MAIN);

@@ -149,13 +147,6 @@
    sdram_enable(DIMM0, DIMM1);
    printk(BIOS_DEBUG, "done sdram enable\n");

-	/*dumplxmsrs();*/
-	/* Check low memory */
-	/* The RAM is working now. Leave this test commented out but
-	 * here for reference. 
-	 * Note that the range 0x87000 will fail; that's the stack! */
-	/*	ram_check(0x00000000, 640*1024);*/
-
    printk(BIOS_DEBUG, "stage1 returns\n");
    return 0;
 }