Hi Yannik,
On 25.11.18 20:05, Yannik Catalinac wrote:
For the SPI programmer I decided to use a CH341A, but when I search for it there are different CH341A. Which one should I buy?
It shouldn't matter as long as it says to be compatible to SPI 25 series. There were reports about bad batches of every kind (e.g. wrong voltage regulator), FWIW. So there's always a risk. I would pick one with a location in Europe (i.e. not China) so you don't wait weeks and then realize you got a bad one. I have one with a black board btw. that works fine.
As you asked for a German shop below, here[1] is a more expensive alternative to the CH341A. 5x the cost, up to 15x the speed (and can also work as a USB debugging device with coreboot; needs another TTL level UART for the other end, though).
Which cables do you recommend? I read that I should use short ones, but which cables exactly dou you recommend? A link to a german shop would be very, very helpful!
Reichelt has some rather expensive ones[2]. Work for me but I can't say if they are any better than random ones from eBay. For the latter search for `10cm dupont female-female` (Buchse-Buchse).
Hope that helps, Nico
[1] https://www.elv.de/elv-highspeed-mini-usb-modul-um-ft2232h-komplettbausatz.h... Also needs a Mini-B (not the popular Micro-B) USB cable in case you don't have a spare one. [2] https://www.reichelt.de/ Search for: steckboard lbb