Hi,
No no no, the disk. The initrd is ext2.
Tried changing the disk to ext2 and still get the same results.
This did work, but is not what I need. 1. Etherboot the filo.elf (4.2) as a payload 2. Run the filo.elf 3. It is able to load my kernel & initrd.elf, only off of the hd, not the usb stick.
Arg!
My setup uses etherboot as a primary to get the kernel & intird as an elf. But if that connection dies I want it to use the kernel & initrd elf on my usb stick. This first part works just fine. It is finding a way to get the second part that is taking me weeks! :(
On Tue, 2004-07-13 at 11:48, Peter Stuge wrote:
On Tue, Jul 13, 2004 at 11:35:01AM -0400, David Aubin wrote:
Thank yo for the image, but oddly it fails exactly the same way.... Found initrd block 0 crc error
I'm using reiserfs, I'll try ext2. I'm really running out of ideas.
For the initrd? I believe only ext2, minix, cramfs and perhaps one other filesystem is actually supported for initrd:s.
//Peter _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
