Hi,

  No no no, the disk.  The initrd is ext2.

  Tried changing the disk to ext2 and still get the same results.

  This did work, but is not what I need.
1.   Etherboot the filo.elf (4.2) as a payload
2.  Run the filo.elf
3.  It is able to load my kernel & initrd.elf, only off of the hd, not the usb stick.

Arg!

  My setup uses etherboot as a primary to get the kernel & intird as an elf.
But if that connection dies I want it to use the kernel & initrd elf on my
usb stick.  This first part works just fine.  It is finding a way to get the second
part that is taking me weeks!  :(

On Tue, 2004-07-13 at 11:48, Peter Stuge wrote: 
On Tue, Jul 13, 2004 at 11:35:01AM -0400, David Aubin wrote:
> Thank yo for the image, but oddly it fails exactly the
> same way....
> Found initrd block 0
> crc error
> 
> I'm using reiserfs, I'll try ext2.  I'm really running out
> of ideas.

For the initrd? I believe only ext2, minix, cramfs and perhaps one
other filesystem is actually supported for initrd:s.


//Peter
_______________________________________________
Linuxbios mailing list
Linuxbios@clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios