Dear sir.
My ENV is see below.
*EVB : Intel rangeley Mohon Peak CRB*
This time, I was download the coreboot from git.
poplinux@raw work $ > git clone http://review.coreboot.org/coreboot.git ./ poplinux@raw work $ > cd coreboot poplinux@raw coreboot $ > git submodule update --init --checkout
Next, *run make menuconfig* and set-up to mohon peak CRB and save & exit
*Mainboa**rd* Mainboard vendor (*Intel*) ---> Mainboard model (*Mohon Peak CRB*) ---> [ ] Configure defaults for the Intel FSP package ROM chip size (2048 KB (2 MB)) ---> (0x00200000) Size of CBFS filesystem in ROM () fmap description file in fmd format
Next, I'm try to build core boot.
poplinux@raw coreboot $ > make GEN generated/bootblock.ld CP bootblock/arch/x86/bootblock.ld LINK cbfs/fallback/bootblock.debug OBJCOPY cbfs/fallback/bootblock.elf OBJCOPY bootblock.raw.bin Checking out SeaBIOS revision 01a84bea2d28a19d2405c1ecac4bdef17683cc0c Switched to branch 'master'
Performing operation on 'COREBOOT' region... Name Offset Type Size cbfs master header 0x0 cbfs header 32 fallback/romstage 0x80 stage 22684 cpu_microcode_blob.bin 0x5980 microcode 0 config 0x5a00 raw 127 revision 0x5ac0 raw 570 cmos_layout.bin 0x5d40 cmos_layout 1316 fallback/dsdt.aml 0x62c0 raw 7952 payload_config 0x8240 raw 1574 payload_revision 0x88c0 raw 237 (empty) 0x8a00 null 29848 mrc.cache 0xfec0 mrc_cache 65536 fallback/ramstage 0x1ff00 stage 46922 fallback/payload 0x2b6c0 payload 61122 (empty) 0x3a5c0 null 1856216 bootblock 0x1ff8c0 bootblock 1528
Finally, I'm got a coreboot image.
poplinux@raw build $ > ls build/coreboot.rom build/coreboot.rom poplinux@raw build $ > ./build/cbfstool build/coreboot.rom print Performing operation on 'COREBOOT' region... Name Offset Type Size cbfs master header 0x0 cbfs header 32 fallback/romstage 0x80 stage 22684 cpu_microcode_blob.bin 0x5980 microcode 0 config 0x5a00 raw 127 revision 0x5ac0 raw 570 cmos_layout.bin 0x5d40 cmos_layout 1316 fallback/dsdt.aml 0x62c0 raw 7952 payload_config 0x8240 raw 1574 payload_revision 0x88c0 raw 237 (empty) 0x8a00 null 29848 mrc.cache 0xfec0 mrc_cache 65536 fallback/ramstage 0x1ff00 stage 46922 fallback/payload 0x2b6c0 payload 61122 (empty) 0x3a5c0 null 1856216 bootblock 0x1ff8c0 bootblock 1528
And I'm write image to my EVB using *ALL-100 Gang-writ**er*. spi flash's write *start address is set 0x00000000*. write it success.
And I'm attach the flash memory to my EVB.
And power-up the my EVB. But can't see any message on my monitor and serial port both.
*Why did not display any message? ** **A**nd could you support correct configuration file for my EVB?*
Thank you.