Am Dienstag, 4. März 2008 12:50 schrieben Sie:
On Tue, Mar 04, 2008 at 08:31:23AM +0100, Klaus Stammermann wrote:
Am Montag, 3. März 2008 21:33 schrieben Sie:
- Klaus Stammermann klaus123@ibnoetzold.de [080303 15:20]:
Hi there
I have some trouble to use coreboot on my VIA EPIA-ME6000 so I hope someone could give me some hints.
With epia-m and filo I can build a bios without vga. This runs till jumping to kernel. This breaks up with an error: Loading kernel... ok "Jumping to entry point... 0
Was the kernel built with serial console support? Was console=ttyS0,... specified as a command line option to the kernel?
Yes, I use following startup parameters: "hda1:/boot/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200"
And you also use 'USE_GRUB = 0'? Otherwise FILO will try to read your menu.lst file from GRUB and ignore the above line.
In file Config on filo 0.4.2 I can't find such an option. But I use LINUX_LOADER = 1 which should activate filo as loader for standard Linux kernel image.
I did not use that optionroms. But how can I use this optionrom? Where do I have to put it in my image?
I think at the beginning (but someone please correct me if I'm wrong), i.e.
cat vga.rom coreboot.com > coreboot_full.rom
I think so too but I don't know exactly. So I will try this.
But you need to tweak the config files too in order to make the coreboot.rom smaller (so there's place for vga.rom).
Uwe.
Klaus