Hi,
When I tried to enable vt6102 ethernet, i got following error. After tracking down the code, I found that it happen because ISR0 (0xc) register report "PCI Bus error". If someone know any clue of the reason, please let me know. Thanks
---------<from here>------------ # insmod via-rhine debug=7 Using /lib/modules/2.4.17/kernel/drivers/net/via-rhine.o via-rhine.c:v1.10-LK1.1.12 03/11/2001 Written by Donald Becker http://www.scyld.com/network/via-rhine.html via-rhine: reset finished after 5 microseconds. eth0: VIA VT6102 Rhine-II at 0xea002000, 00:40:63:c3:98:09, IRQ 11. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. # ifconfig eth0 129.254.180.119 up eth0: reset finished after 5 microseconds. eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. # eth0: Something Wicked happened! 0040. <----------- ERROR, net doesn't work. ---------<end here>------------
- HeeChul Yun, Embedded S/W Team at ETRI phone: +82-42-860-1673