Greetings,
It's confusion over the image names. The fallback image is the one you want. Fallback has the actual power on reset vector. When normal boot is configured in CMOS, the fallback image jumps into the 'normal' image early in the setup. Should that image fail, the next time through, fallback does it all itself. I should document this!
G'day, sjames
On Mon, 27 Jan 2003, Jarmo Tulonen wrote:
Hello
I've been testing LinuxBIOS on Tyan's Tiger MPX, using etherboot as payload, but with no luck so far. Nothing is output to the serial port and nothing sent to the ethernet so I guess I must have something fundamentally wrong.
Steven : I used as configuration the file "example-normal.config" that you provided, just replacing the path to etherboot, and the files under .../mainboard/tyan/TigerMPX without modification. I've understood that you tested it on a similar board (or was it the "-4M" version ?)
Any ideas how to proceed ?
Jarmo _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios