Enough for one night. I'm also checking 51400024 for mask in this pass.
So, it's all wired right, eth0 works fine as it is swizzled to INTB, and it behaves as expected and as this program says it should. what doesn't work is PCI 3v slot to INTS C or D. And, they're shared with USB, and I'm convinced that's part of it.
But maybe somebody out there can see it; I can not yet.
Code attached; hack away.
ron
/tmp/lxirq input enable 0f7af085 invert 0xcf7e3081 irqmap from vr is 0xd0c0700 4d1:4d0 0e00 GPIOmap (e0 to e8): 0/20000001 4/08051538 8/14000e00 12/00000000 GPIO0: Interrupt:IG 1 GPIO7: Interrupt:IG 2 GPIO12: Interrupt:IG 3 GPIO13: Interrupt:IG 4 MSR 0x51400023: 0x9bab2
MSR 0x51400024: 0xffff
INTA, GPIO pin 0;Input Enabled and Inverted,Interrupt:GPIO BIT 1,IG 11,Not masked, INTB, GPIO pin 7;Input Enabled and Inverted,Interrupt:GPIO BIT 2,IG 10,Not masked, INTC, GPIO pin 12;Input Enabled and Inverted,Interrupt:GPIO BIT 3,IG 11,Not masked, INTD, GPIO pin 13;Input Enabled and Inverted,Interrupt:GPIO BIT 4,IG 9,Not masked,