答复: What is this good for?

[YhLu]

Eric,

Can you commit the patch that can reduce the time of memory clearing?

If the MB is configured with 8G, it will take around 2 minutes to get it
finished.

Regards

YH.

-----邮件原件-----
发件人: [e-mail] [mailto:[e-mail]] 
发送时间: 2004年2月10日 7:21
收件人: Stefan Reinauer
抄送: [e-mail]
主题: Re: What is this good for?

Stefan Reinauer  writes:
> Hi,
>
> I appreciate that we only have to do one reset when optimizing HT links:

http://cvs.sourceforge.net/viewcvs.py/freebios/freebios2/src/northbridge/amd
/amdk8/misc_control.c?r1=1.4&r2=1.5
> What I don't like about the whole situation is the fact that this code
> does not honour the actually available links but does hardcodes. 
> This will break Athlon64 systems _ONCE AGAIN_
>
> Please, instead of removing my comments, do read them - They explain
> pretty well why certain code is only enabled for CONFIG_MAX_CPUS > 1

Ugh yes that change looks nasty.  Here is the version I am running,
and it does work on AMD64 systems.  It relies on the fact
that the unused HT links return 0, instead of doing the prettier
thing of walking the capabilities, but it does work.

I don't have time at the moment to get this merged, but at
least this will give you something to work with.

Eric

/* Turn off machine check triggers when reading
 * pci space where there are no devices.
 * This is necessary when scaning the bus for
 * devices which is done by the kernel */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <part/hard_reset.h>
#include "./cpu_rev.c"
#include "amdk8.h"

#define IOMMU_APETURE_SIZE (64*1024*1024) /* 64M */
static void mcf3_read_resources(device_t dev)
{
    struct resource *resource;
    /* Read the generic PCI resources */
    pci_dev_read_resources(dev);

/* If we are not the first processor don't allocate the gart apeture
*/
    if (dev->path.u.pci.devfn != PCI_DEVFN(24, 3)) {
    	return;
    }
    	
    /* Add a 64M Gart apeture resource */
    if (dev->resources < MAX_RESOURCES) {
    	resource = &dev->resource[dev->resources];
    	dev->resources++;
    	resource->base  = 0;
    	resource->size  = IOMMU_APETURE_SIZE;
    	resource->align = log2(resource->size);
    	resource->gran  = log2(resource->size);
    	resource->limit = 0xffffffff; /* 4G */
    	resource->flags = IORESOURCE_MEM;
    	resource->index = 0x94;
    }
    else {
    	printk_err("%s Unexpeted resource shortage\n",
dev_path(dev));
    }
}

static void mcf3_set_resources(device_t dev)
{
    struct resource *resource, *last;
    last = &dev->resource[dev->resources];
    for(resource = &dev->resource[0]; resource < last; resource++) {
    	if (resource->index == 0x94) {
    		device_t pdev;
    		uint32_t base;
    		uint32_t size;
    		
    		size = (0<<6)|(0<<5)|(0<<4)|((log2(resource->size) -
25) << 1)|(0<<0);
    		base = ((resource->base) >> 25) & 0x00007fff;
    		
    		pdev = 0;
    		while(pdev = dev_find_device(PCI_VENDOR_ID_AMD,
0x1103, pdev)) {
    			/* I want a 64M GART apeture */
    			pci_write_config32(pdev, 0x90,
(0<<6)|(0<<5)|(0<<4)|(1<<1)|(0<<0));
    			/* Store the GART base address */
    			pci_write_config32(pdev, 0x94, base);
    			/* Don't set the GART Table base address */
    			pci_write_config32(pdev, 0x98, 0);

printk_debug(
    				"%s %02x <- [0x%08lx - 0x%08lx] mem
<gart>\n",
    				dev_path(pdev),
    				resource->index, 
    				resource->base, resource->base +
resource->size - 1);
    		}
    		/* Remember this resource has been stored */
    		resource->flags |= IORESOURCE_STORED;

}
    }
    /* Set the generic PCI resources */
    pci_dev_set_resources(dev);
}

static void misc_control_init(struct device *dev)
{
    uint32_t cmd, cmd_ref;
    int needs_reset;
    struct device *f0_dev, *f2_dev;
    
    printk_debug("NB: Function 3 Misc Control.. ");
    needs_reset = 0;

/* Disable Machine checks from Invalid Locations.
     * This is needed for PC backwards compatibility.
     */
    cmd = pci_read_config32(dev, 0x44);
    cmd |= (1<<6) | (1<<25);
    pci_write_config32(dev, 0x44, cmd );
    if (is_cpu_pre_c0()) {

/* Errata 58
    	 * Disable CPU low power states C2, C1 and throttling 
    	 */
    	cmd = pci_read_config32(dev, 0x80);
    	cmd &= ~(1<<0);
    	pci_write_config32(dev, 0x80, cmd );
    	cmd = pci_read_config32(dev, 0x84);
    	cmd &= ~(1<<24);
    	cmd &= ~(1<<8);
    	pci_write_config32(dev, 0x84, cmd );

/* Errata 66
    	 * Limit the number of downstream posted requests to 1 
    	 */
    	cmd = pci_read_config32(dev, 0x70);
    	if ((cmd & (3 << 0)) != 2) {
    		cmd &= ~(3<<0);
    		cmd |= (2<<0);
    		pci_write_config32(dev, 0x70, cmd );
    		needs_reset = 1;
    	}
    	cmd = pci_read_config32(dev, 0x7c);
    	if ((cmd & (3 << 4)) != 0) {
    		cmd &= ~(3<<4);
    		cmd |= (0<<4);
    		pci_write_config32(dev, 0x7c, cmd );
    		needs_reset = 1;
    	}
    	/* Clock Power/Timing Low */
    	cmd = pci_read_config32(dev, 0xd4);
    	if (cmd != 0x000D0001) {
    		cmd = 0x000D0001;
    		pci_write_config32(dev, 0xd4, cmd);
    		needs_reset = 1; /* Needed? */
    	}
    }
    else {
    	uint32_t dcl;
    	f2_dev = dev_find_slot(0, dev->path.u.pci.devfn - 3 + 2);
    	/* Errata 98 
    	 * Set Clk Ramp Hystersis to 7
    	 * Clock Power/Timing Low
    	 */
    	cmd_ref = 0x04e20707; /* Registered */
    	dcl = pci_read_config32(f2_dev, DRAM_CONFIG_LOW);
    	if (dcl & DCL_UnBufDimm) {
    		cmd_ref = 0x000D0701; /* Unbuffered */
    	}
    	cmd = pci_read_config32(dev, 0xd4);
    	if(cmd != cmd_ref) {
    		pci_write_config32(dev, 0xd4, cmd_ref );
    		needs_reset = 1; /* Needed? */
    	}
    }
    /* Optimize the Link read pointers */
    f0_dev = dev_find_slot(0, dev->path.u.pci.devfn - 3);
    if (f0_dev) {
    	int link;
    	cmd_ref = cmd = pci_read_config32(dev, 0xdc);
    	for(link = 0; link < 3; link++) {
    		uint32_t link_type;
    		unsigned reg;
    		reg = 0x98 + (link * 0x20);
    		link_type = pci_read_config32(f0_dev, reg);
    		if (link_type & LinkConnected) {
    			cmd &= 0xff << (link *8);
    			/* FIXME this assumes the device on the
other side is an AMD device */
    			cmd |= 0x25 << (link *8);
    		}
    	}
    	if (cmd != cmd_ref) {
    		pci_write_config32(dev, 0xdc, cmd);
    		needs_reset = 1;
    	}
    }
    else {
    	printk_err("Missing f0 device!\n");
    }
    if (needs_reset) {
    	printk_debug("resetting cpu\n");
    	hard_reset();
    }
    printk_debug("done.\n");
}

static struct device_operations mcf3_ops  = {
    .read_resources   = mcf3_read_resources,
    .set_resources    = mcf3_set_resources,
    .enable_resources = pci_dev_enable_resources,
    .init             = misc_control_init,
    .scan_bus         = 0,
};

static struct pci_driver mcf3_driver __pci_driver = {
    .ops    = &mcf3_ops,
    .vendor = PCI_VENDOR_ID_AMD,
    .device = 0x1103,
};
_______________________________________________
Linuxbios mailing list
[e-mail]
http://www.clustermatic.org/mailman/listinfo/linuxbios