Re: [LinuxBIOS] New guy in LinuxBios

[Vincente Tsou]

Dear YH,

got it.

Thanks for the information and your help.

2006/6/21, Lu, Yinghai :
> Actually the irqtable entries is only for peer root pci bus scan when
> mptable is used.
>
> So you need to make sure mptable is right, and put entries for
> hypertransport chain other than on bus0.
>
> YH
>
> *From:* [e-mail] [mailto:[e-mail]] *On
> Behalf Of *Vincente Tsou
> *Sent:* Tuesday, June 20, 2006 7:05 PM
> *To:* Lu, Yinghai
> *Cc:* Stefan Reinauer; [e-mail]
>
> *Subject:* Re: [LinuxBIOS] New guy in LinuxBios
>
> Dear YH,
>
> excuse me, how about the irq_tables.c?
>
> should I modify it like tyan/s2882 did.
>     printk_debug("setting Onboard Broadcom NIC\n");
>     static const unsigned char slotIrqs_8131_1_9[4] = { 5, 9, 0, 0 };
>     pci_assign_irqs(bus_8131_1, 9, slotIrqs_8131_1_9);
>     write_pirq_info(pirq_info, bus_8131_1,(9<<3)|0, 0x1, 0xdef8, 0x2,
>
> 0xdef8, 0, 0, 0, 0, 0, 0);
>         pirq_info++; slot_num++;
>
> 2006/6/20, Lu, Yinghai :
>
> You need to update the entries at mptable.c for your slots or onboard pci
> device.
>
> YH
>
> Engineer
> R/D, S/W Dept.
> NEXCOM International Co.
> Tel: [phone] Ext. 3205
> Fax: [phone]
> E-mail: [e-mail]
> Web: http://www.nexcom.com.tw/