Sorry, I forgot to include the contents of the ROM image:
ricardo@ricardo-VirtualBox:~/BAY_TRAIL_FSP_KIT/coreboot$ build/cbfstool build/coreboot.rom print coreboot.rom: 8192 kB, bootblocksize 1024, romsize 8388608, offset 0x600000 alignment: 64 bytes
Name Offset Type Size cmos_layout.bin 0x600000 cmos_layout 1132 pci8086,0f31.rom 0x6004c0 optionrom 65536 fallback/romstage 0x610500 stage 26364 fallback/ramstage 0x616c40 stage 58469 fallback/payload 0x625100 payload 118456 config 0x642000 raw 4012 (empty) 0x643000 null 839640 cpu_microcode_blob.bin 0x710000 microcode 104448 (empty) 0x729840 null 616280 fsp.bin 0x7bffc0 (unknown) 229376 (empty) 0x7f8000 null 31640
On Tue, Jul 15, 2014 at 2:45 PM, Ricardo Menzer ricardomenzer@gmail.com wrote:
Hi. I'm also trying to use Coreboot with a COM Express Module from Cogatec. It is a Conga-MA3 model [http://www.congatec.com/products/com-express-type10/conga-ma3.html]. Booting the original BIOS into Linux, and doing a cat /proc/cpu shows the processor stepping is 3, so i'm assuming it's a B3 silicon. I have used Intel BCT to patch the FSP so its configuration matches the memory chips used in this module. I am testing it with a base board made by Kontron, which provides a four digit port 80h/81h display and a SPI socket, allowing me to use an external flash and preserve module's flash. I couldn't make flashrom detect the flash memory when using this module from Congatec, even disabling BIOS memory write protection on BIOS setup, but I'm using another module to flash the external SPI and swapping modules after. (I plan to find out why it isn't detected later).
I've copied /home/ricardo/BAY_TRAIL_FSP_KIT/Microcode/M013067331E.h /home/ricardo/BAY_TRAIL_FSP_KIT/Microcode/M0230672228.h to /home/ricardo/BAY_TRAIL_FSP_KIT/coreboot/src/soc/intel/fsp_baytrail/microcode so Coreboot can compile (otherwise Make fails).
The first image I've burned didn't worked (.config file attached). There's no POST codes in the display. I think it may be a issue with the TXE firmware. How can I check it?
I'm trying to learn about the inner workings of coreboot. How can I help to support this module/chipset?
Thanks.
On Thu, Jul 10, 2014 at 7:29 PM, ron minnich rminnich@gmail.com wrote:
On Wed, Jun 25, 2014 at 4:11 AM, benjamin nakache bnakache@nolam.com wrote:
Hello ,
When will support the new Atom E38XX
Would you or someone from your company like to help?
Note: This message and any attachment hereto is intended solely for the use of the designated recipient(s) and their appointed delegates and may contain confidential information. Any unauthorized use, disclosure,copying, or distribution of its contents is strictly prohibited. If you have received this message in error, please destroy it and advise Nolam Embedded Systems immediately by phone, email, or fax.Thank you for your cooperation.
You should remove this Note:, else we won't be able to receive your messages any more :-)
thanks
ron
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
--
Ricardo Menzer ricardomenzer@gmail.com (32)8865-8805