Knut Kujat escribió:
Peter Stuge escribió:
Knut Kujat wrote:
I haven't tried swapping CPUs or RAM. But this errors appears on memory initialization, right? So its most likely a ram issue?
The memory controller is built-in to the CPU.
Try swapping components around and see if the problem follows some particular parts.
//Peter
Hello,
switching memory from a working board to the failing board worked "partially" because now it boots and even starts seabios but seabios can't find the hard drive!! It's like there isn't one installed I already switched HD with the working board and no result, of course everything works fine with vendor bios.
That's odd!
thx, Knut Kujat.
I "solved" it. There are 3 sata cables connected to the board only 1 actually has a hard drive connected to it. Seems like this cable has to be connected to sata 1 and before all others. Is this right? Can someone confirm that pleas?
Bye and THX, Knut Kujat.