see comment below
svn@openbios.org wrote:
Author: uwe Date: 2007-05-09 12:26:19 +0200 (Wed, 09 May 2007) New Revision: 317
Modified: LinuxBIOSv3/README Log: Short installation instructions for LinuxBIOSv3 (trivial).
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: LinuxBIOSv3/README
--- LinuxBIOSv3/README 2007-05-06 18:52:16 UTC (rev 316) +++ LinuxBIOSv3/README 2007-05-09 10:26:19 UTC (rev 317) @@ -39,6 +39,38 @@
+Building and Installing +-----------------------
+Note: Currently only the x86 QEMU target is supported in LinuxBIOSv3.
+1) Build a payload:
- For example: FILO.
+2) Configure LinuxBIOS:
- $ make menuconfig
- Select at least the desired mainboard vendor, the mainboard device,
- the size of your ROM chip, and a payload.
+3) Build the LinuxBIOS ROM image:
- $ make
- The generated ROM image is build/linuxbios.rom.
Might want to add something around here about how to make qemu use the new rom.
+4) You can now test the LinuxBIOS image using:
- $ qemu -L build -hda /dev/zero -serial stdio
- If you have a full QEMU image with a Linux distribution installed,
- you can boot that Linux kernel by using a proper FILO payload and typing:
- $ qemu -L build -hda /tmp/qemu.img -serial stdio
Website and Mailing List