Author: mjones Date: 2008-11-07 01:51:38 +0100 (Fri, 07 Nov 2008) New Revision: 986
Modified: coreboot-v3/mainboard/pcengines/alix2c3/dts Log: LPC serial IRQs were being left enabled when there is no LPC serial device.
Signed-off-by: Marc Jones marcj303@yahoo.com Acked-by: Ronald G. Minnich rminnich@gmail.com
Modified: coreboot-v3/mainboard/pcengines/alix2c3/dts =================================================================== --- coreboot-v3/mainboard/pcengines/alix2c3/dts 2008-11-06 17:52:52 UTC (rev 985) +++ coreboot-v3/mainboard/pcengines/alix2c3/dts 2008-11-07 00:51:38 UTC (rev 986) @@ -34,9 +34,9 @@ /config/("southbridge/amd/cs5536/dts"); /* Interrupt enables for LPC bus. * Each bit is an IRQ 0-15. */ - lpc_serirq_enable = "0x0000105A"; + lpc_serirq_enable = "0x00001002"; /* LPC IRQ polarity. Each bit is an IRQ 0-15. */ - lpc_serirq_polarity = "0x0000EFA5"; + lpc_serirq_polarity = "0x0000EFFD"; /* 0:continuous 1:quiet */ lpc_serirq_mode = "1"; /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none.