Hi,
there were a couple of copies of vgabios.c that looked for the option rom image at fixed addresses (usually begin of flash), which is not the supported way of doing things anymore.
As this patch removes the non-CBFS capability, I'd commit it right after the removal of non-CBFS support this evening (in ~3 hours), as non-CBFS support isn't necessary anymore at that point.
Of course, the duplication should be eliminated, as well as (some of) the rom_address entries in Config.lb and devicetree.cb for the boards.
It might also be worthwhile to investigate if src/devices/pci_rom.c couldn't be used for the option rom loading. Just using dev->rom_address didn't work on my board, but this fix was good enough for me for now.
The change is the same in all vgabios.c files, it's boot tested on cx700 (via/vt8454c), via/epia-m and artecgroup/dbe61 are build tested. Furthermore, for cn400, via/epia-n built, for cn700, via/epia-cn built, for vx800, via/epia-m700 built
Signed-off-by: Patrick Georgi patrick.georgi@coresystems.de