On Fri, Apr 27, 2007 at 01:17:27PM +0200, Luc Verhaegen wrote:
On Fri, Apr 27, 2007 at 01:01:19PM +0200, Mondrian Nuessle wrote:
The attached patch enables flashing on the Iwill DK8-HTX board. Basically, it configures the SuperIO to set the right GPIO pins, so write protection is disabled.
Signed-off-by: Mondrian Nuessle nuessle@uni-mannheim.de
Ok, this is the third try :-)
Regards, Mondrian
- /* set GPIO regs... */
- outb(0x2b, EFIR); /* GPIO multiplexed pin reg. */
- b = inb(EFDR) | 0xd0;
- outb(0x2b, EFIR);
- outb(b, EFDR);
Is it really necessary to write the index register twice here? Not that it matters much in codesize.
I would like an answer there, just for reference, so don't worry about it patchwise :)
Acked-by: Luc Verhaegen libv@skynet.be
Luc Verhaegen.