Re: [coreboot] Fam10h support for Tyan S2912-E

[Marc Jones]

Arne Georg Gleditsch wrote:
> Hi,
>
> I have a S2912 system that I'd like to run coreboot on.  As I understand
> it, both the S2912 and Fam10h is supported seperately, but some porting
> is required to make the combination work.  I'd like to work on getting
> this configuration operational.  If anyone has any pointers on how to
> tackle it, that would be more than welcome.
>
> Thanks in advance,

Hi Arne,

If you are prepared to do firmware development (socketed ROM, etc) the 
port should not be too difficult. The amd/serengeti_cheetah_fam10 
mainboard should be a good example to work from. It is helpful if you 
have access to motherboard and chipset documents.

Marc