Hi,
did you get somewhere with your M2V? I'm looking into it right now, but I don't have the vt8237a docs. Coreboot starts initializing HW, but it hangs during the bus scan... Looks like it hangs while trying to scan the pcie bridge 00:02.0
coreboot-4.0-r5976M Thu Oct 21 02:30:11 CEST 2010 starting... now booting... Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done core0 started: now booting... All core 0 started started ap apicid: SBLink=00 NC node|link=00 00entering optimize_link_incoherent_ht sysinfo->link_pair_num=0x1 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x75 pos=0x6e, unfiltered freq_cap=0x75 pos=0x6e, filtered freq_cap=0x75 freq_cap1=0x75, freq_cap2=0x75 dev1 old_freq=0x0, freq=0x6, needs_reset=0x1 dev2 old_freq=0x0, freq=0x6, needs_reset=0x1 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 after ht_optimize_link for link pair 0, reset_needed=0x1 after optimize_link_read_pointers_chain, reset_needed=0x1 01K8T890 found at LDT 00 Agreed on width: 01 CPU programmed to HT freq: 06 VIA HT caps: 0075 01ht reset - soft reset
coreboot-4.0-r5976M Thu Oct 21 02:30:11 CEST 2010 starting... now booting... Enabling routing table for node 00 done. Enabling UP settings Disabling read/write/fill probes for UP... done. coherent_ht_finalize done core0 started: now booting... All core 0 started started ap apicid: SBLink=00 NC node|link=00 00entering optimize_link_incoherent_ht sysinfo->link_pair_num=0x1 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x75 pos=0x6e, unfiltered freq_cap=0x75 pos=0x6e, filtered freq_cap=0x75 freq_cap1=0x75, freq_cap2=0x75 dev1 old_freq=0x6, freq=0x6, needs_reset=0x0 dev2 old_freq=0x6, freq=0x6, needs_reset=0x0 width_cap1=0x11, width_cap2=0x11 dev1 input ln_width1=0x4, ln_width2=0x4 dev1 input width=0x1 dev1 output ln_width1=0x4, ln_width2=0x4 dev1 input|output width=0x11 old dev1 input|output width=0x11 dev2 input|output width=0x11 old dev2 input|output width=0x11 after ht_optimize_link for link pair 0, reset_needed=0x0 after optimize_link_read_pointers_chain, reset_needed=0x0 00K8T890 found at LDT 00 Agreed on width: 01 CPU programmed to HT freq: 06 VIA HT caps: 0075 00after enable_fid_change toggle LDTSTP# done Current fid_cur: 0x2, fid_max: 0xc Requested fid_new: 0xc FidVid table step fidvid: 0xc toggle LDTSTP# done FidVid table step fidvid: 0xc toggle LDTSTP# done FidVid table step fidvid: 0xc toggle LDTSTP# done FidVid table step fidvid: 0xc toggle LDTSTP# done FidVid table step fidvid: 0xc toggle LDTSTP# done FidVid table step fidvid: 0xc toggle LDTSTP# done FidVid table step fidvid: 0xc toggle LDTSTP# done FidVid table step fidvid: 0xc toggle LDTSTP# done toggle LDTSTP# done set vid failed for apicid =00 set fid failed for apicid =00 enable_smbus() Ram1.00 setting up CPU 00 northbridge registers done. Ram2.00 sdram_set_spd_registers: paramx :000ceee8 Enabling dual channel memory Unbuffered 266MHz 266MHz Interleaved RAM end at 0x00800000 kB Ram3 Initializing memory: done Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB Setting variable MTRR 3, base: 2048MB, range: 1024MB, type WB Setting variable MTRR 4, base: 3072MB, range: 512MB, type WB Setting variable MTRR 5, base: 3584MB, range: 256MB, type WB Setting variable MTRR 6, base: 3840MB, range: 128MB, type WB Setting variable MTRR 7, base: 3968MB, range: 64MB, type WB DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=06 done DQS Training:DQSPos: 00 TrainDQSRdWrPos: buf_a:000ce950 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 TrainDQSPos: MutualCSPassW[48] :000ce828 done DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=38 done DQS SAVE NVRAM: c2000 Writing 111322 of size 4 to nvram pos: 0 Writing 17181717 of size 4 to nvram pos: 4 Writing 17181817 of size 4 to nvram pos: 8 Writing 17 of size 1 to nvram pos: 12 Writing 342f00 of size 4 to nvram pos: 13 Writing 16161717 of size 4 to nvram pos: 17 Writing 17161717 of size 4 to nvram pos: 21 Writing 17 of size 1 to nvram pos: 25 Writing 35 of size 1 to nvram pos: 26 Writing 38 of size 1 to nvram pos: 27 Writing 0 of size 1 to nvram pos: 28 Writing 0 of size 1 to nvram pos: 29 Writing 111322 of size 4 to nvram pos: 30 Writing 17161617 of size 4 to nvram pos: 34 Writing 17171818 of size 4 to nvram pos: 38 Writing 18 of size 1 to nvram pos: 42 Writing 342f00 of size 4 to nvram pos: 43 Writing 16161615 of size 4 to nvram pos: 47 Writing 18161616 of size 4 to nvram pos: 51 Writing 16 of size 1 to nvram pos: 55 Writing 35 of size 1 to nvram pos: 56 Writing 38 of size 1 to nvram pos: 57 Writing 0 of size 1 to nvram pos: 58 Writing 0 of size 1 to nvram pos: 59 Writing 34108099 of size 4 to nvram pos: 60 DQS Training:tsc[00]=000000006852302d DQS Training:tsc[01]=0000000069705232 DQS Training:tsc[02]=000000006970523b DQS Training:tsc[03]=00000000f0113e95 DQS Training:tsc[04]=00000001021a6006 Ram4 v_esp=000cef28 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Loading stage image. Check CBFS header at fffffc6e magic is 4f524243 Found CBFS header at fffffc6e Check fallback/romstage CBFS: follow chain: fffc0000 + 38 + b461 + align -> fffcb4c0 Check fallback/coreboot_ram Stage: loading fallback/coreboot_ram @ 0x100000 (491520 bytes), entry @ 0x100000 Stage: done loading. Jumping to image. coreboot-4.0-r5976M Thu Oct 21 02:30:11 CEST 2010 booting... Enumerating buses... Show all devs...Before Device Enumeration. Root Device: enabled 1 APIC_CLUSTER: 0: enabled 1 APIC: 00: enabled 1 PCI_DOMAIN: 0000: enabled 1 PCI: 00:18.0: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:0f.1: enabled 1 PCI: 00:11.0: enabled 1 I2C: 00:50: enabled 1 I2C: 00:51: enabled 1 I2C: 00:52: enabled 1 I2C: 00:53: enabled 1 PNP: 002e.0: enabled 1 PNP: 002e.1: enabled 1 PNP: 002e.2: enabled 1 PNP: 002e.3: enabled 0 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 0 PNP: 002e.6: enabled 0 PNP: 002e.7: enabled 0 PNP: 002e.8: enabled 0 PNP: 002e.9: enabled 0 PNP: 002e.a: enabled 0 PCI: 00:12.0: enabled 0 PCI: 00:18.1: enabled 1 PCI: 00:18.2: enabled 1 PCI: 00:18.3: enabled 1 Compare with tree... Root Device: enabled 1 APIC_CLUSTER: 0: enabled 1 APIC: 00: enabled 1 PCI_DOMAIN: 0000: enabled 1 PCI: 00:18.0: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:0f.1: enabled 1 PCI: 00:11.0: enabled 1 I2C: 00:50: enabled 1 I2C: 00:51: enabled 1 I2C: 00:52: enabled 1 I2C: 00:53: enabled 1 PNP: 002e.0: enabled 1 PNP: 002e.1: enabled 1 PNP: 002e.2: enabled 1 PNP: 002e.3: enabled 0 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 0 PNP: 002e.6: enabled 0 PNP: 002e.7: enabled 0 PNP: 002e.8: enabled 0 PNP: 002e.9: enabled 0 PNP: 002e.a: enabled 0 PCI: 00:12.0: enabled 0 PCI: 00:18.1: enabled 1 PCI: 00:18.2: enabled 1 PCI: 00:18.3: enabled 1 scan_static_bus for Root Device APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled APIC_CLUSTER: 0 scanning... PCI: 00:18.3 siblings=0 Found Rev E or Rev F later single core CPU: APIC: 00 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] bus ops PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: Using configuration type 1 PCI: 00:00.0 [1106/0351] enabled Capability: type 0x01 @ 0x50 Capability: type 0x08 @ 0x60 flags: 0x0060 PCI: 00:00.0 count: 0003 static_count: 0013 PCI: 00:00.0 [1106/0351] enabled next_unitid: 0013 PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [1106/0351] enabled malloc Enter, size 68, free_mem_ptr 00138000 malloc 00138000 PCI: 00:00.1 [1106/1351] enabled malloc Enter, size 68, free_mem_ptr 00138044 malloc 00138044 PCI: 00:00.2 [1106/2351] enabled malloc Enter, size 68, free_mem_ptr 00138088 malloc 00138088 PCI: 00:00.3 [1106/3351] enabled malloc Enter, size 68, free_mem_ptr 001380cc malloc 001380cc PCI: 00:00.4 [1106/4351] enabled malloc Enter, size 68, free_mem_ptr 00138110 malloc 00138110 PCI: 00:00.5 [1106/5351] enabled malloc Enter, size 68, free_mem_ptr 00138154 malloc 00138154 PCI: 00:00.6 [1106/6238] enabled malloc Enter, size 68, free_mem_ptr 00138198 malloc 00138198 PCI: 00:00.7 [1106/7351] enabled malloc Enter, size 68, free_mem_ptr 001381dc malloc 001381dc PCI: 00:01.0 [1106/b188] bus ops B188 device dump 00: 06 11 88 b1 07 00 30 02 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 20 02 20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 70 00 00 00 00 00 00 00 00 00 16 00 40: 91 40 00 44 31 3a 88 b1 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 0e 70 35 00 07 02 00 1f 00 00 00 00 28 00 00 00 90: 80 00 00 00 00 08 01 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: bf 63 08 00 00 00 00 00 00 00 1f c4 00 04 00 00 c0: 08 00 0b ff 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 PCI: 00:01.0 [1106/b188] enabled malloc Enter, size 68, free_mem_ptr 00138220 malloc 00138220 PCI: 00:02.0 [1106/a238] bus ops Configuring PCIe PEG 00: 06 11 38 a2 00 00 10 00 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 00 00 40: 10 68 41 01 01 0e 00 00 00 00 10 00 01 0d 18 00 50: 00 00 20 00 60 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 0c 12 c0 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 43 02 27 8a 44 44 44 44 44 44 44 44 00 00 00 00 d0: 50 00 00 00 02 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 04 84 50 c2 00 00 00 8f 00 97 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00: 06 11 38 a2 00 00 10 00 00 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 00 00 40: 10 68 41 01 01 0e 00 00 00 00 10 00 01 0d 18 00 50: 00 00 20 00 60 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 7c ff 7f 04 00 00 00 00 00 00 00 00 b0: 0c f0 c0 81 00 00 03 00 01 00 00 00 00 00 00 00 c0: 43 02 27 8a 44 44 44 44 44 44 44 44 00 00 00 00 d0: 50 00 00 00 02 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0b 84 50 c2 00 00 00 8f 00 97 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 PCI: 00:02.0 [1106/a238] enabled malloc Enter, size 68, free_mem_ptr 00138264 malloc 00138264 PCI: 00:03.0 [1106/c238] bus ops Configuring PCIe PEXs 00: 06 11 38 c2 00 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 00 00 40: 10 68 41 01 c1 0e 00 00 00 00 10 00 41 0c 18 01 50: 00 00 11 20 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 3b 59 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 43 4a 27 8a 44 44 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 02 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 00 00 22 28 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00: 06 11 38 c2 00 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 00 00 40: 10 68 41 01 c1 0e 00 00 00 00 10 00 41 0c 18 01 50: 00 00 11 20 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 3b f0 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 43 4a 27 8a 44 44 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 02 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0b 00 22 28 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 PCI: 00:03.0 [1106/c238] enabled malloc Enter, size 68, free_mem_ptr 001382a8 malloc 001382a8 PCI: 00:03.1 [1106/d238] bus ops Configuring PCIe PEXs 00: 06 11 38 d2 00 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 00 00 40: 10 68 41 01 81 0f 00 00 00 00 10 00 11 0c 18 02 50: 10 00 00 00 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 3b 59 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 03 18 00 8a 44 44 44 44 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0f 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00: 06 11 38 d2 00 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 00 00 40: 10 68 41 01 81 0f 00 00 00 00 10 00 11 0c 18 02 50: 00 00 11 20 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 3b f0 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 03 18 00 8a 44 44 44 44 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00 PCI: 00:03.1 [1106/d238] enabled malloc Enter, size 68, free_mem_ptr 001382ec malloc 001382ec PCI: 00:03.2 [1106/e238] bus ops Configuring PCIe PEXs 00: 06 11 38 e2 00 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 03 00 00 40: 10 68 41 01 81 0f 00 00 00 00 10 00 11 0c 18 03 50: 00 00 11 20 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 3b 59 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 00 00 00 8a 04 00 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0c 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00: 06 11 38 e2 00 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 03 00 00 40: 10 68 41 01 81 0f 00 00 00 00 10 00 11 0c 18 03 50: 00 00 11 20 60 00 00 00 00 00 48 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 3b f0 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 00 00 00 8a 04 00 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 PCI: 00:03.2 [1106/e238] enabled malloc Enter, size 68, free_mem_ptr 00138330 malloc 00138330 PCI: 00:03.3 [1106/f238] bus ops Configuring PCIe PEXs 00: 06 11 38 f2 00 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 04 00 00 40: 10 68 41 01 01 0e 00 00 00 00 10 00 11 0c 18 04 50: 10 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 3b 59 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 00 00 00 8a 04 00 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 09 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00: 06 11 38 f2 00 00 10 00 00 00 04 06 00 00 81 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 04 00 00 40: 10 68 41 01 01 0e 00 00 00 00 10 00 11 0c 18 04 50: 00 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00 70: 05 00 80 01 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 44 30 f1 5c ff 7f 04 00 00 00 00 00 00 00 00 b0: 3b f0 40 81 00 00 03 00 00 00 00 00 00 00 00 00 c0: 00 00 00 8a 04 00 00 00 00 00 00 00 00 00 00 00 d0: 50 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8 e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 PCI: 00:03.3 [1106/f238] enabled malloc Enter, size 68, free_mem_ptr 00138374 malloc 00138374 PCI: 00:0b.0 [102b/0519] enabled malloc Enter, size 68, free_mem_ptr 001383b8 malloc 001383b8 PCI: 00:0f.0 [1106/0591] enabled PCI: 00:0f.1 [1106/0571] ops PCI: 00:0f.1 [1106/0571] enabled malloc Enter, size 68, free_mem_ptr 001383fc malloc 001383fc PCI: 00:10.0 [1106/3038] ops PCI: 00:10.0 [1106/3038] enabled malloc Enter, size 68, free_mem_ptr 00138440 malloc 00138440 PCI: 00:10.1 [1106/3038] ops PCI: 00:10.1 [1106/3038] enabled malloc Enter, size 68, free_mem_ptr 00138484 malloc 00138484 PCI: 00:10.2 [1106/3038] ops PCI: 00:10.2 [1106/3038] enabled malloc Enter, size 68, free_mem_ptr 001384c8 malloc 001384c8 PCI: 00:10.3 [1106/3038] ops PCI: 00:10.3 [1106/3038] enabled malloc Enter, size 68, free_mem_ptr 0013850c malloc 0013850c PCI: 00:10.4 [1106/3104] ops PCI: 00:10.4 [1106/3104] enabled PCI: 00:11.0 [1106/3337] enabled malloc Enter, size 68, free_mem_ptr 00138550 malloc 00138550 PCI: 00:11.7 [1106/287e] ops PCI: 00:11.7 [1106/287e] enabled do_pci_scan_bridge for PCI: 00:01.0 malloc Enter, size 24, free_mem_ptr 00138594 malloc 00138594 PCI: pci_scan_bus for bus 01 PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 do_pci_scan_bridge for PCI: 00:02.0 malloc Enter, size 24, free_mem_ptr 001385ac malloc 001385ac PCI: pci_scan_bus for bus 02 [hangs here]
Patch so far (mostly copied from a8v-e_se and m2v-mx_se):
Index: src/southbridge/via/vt8237r/vt8237r_early_smbus.c =================================================================== --- src/southbridge/via/vt8237r/vt8237r_early_smbus.c (revision 5976) +++ src/southbridge/via/vt8237r/vt8237r_early_smbus.c (working copy) @@ -142,6 +142,7 @@ device_t dev; int loops;
+ print_debug("enable_smbus()\n"); /* Power management controller */ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); @@ -149,8 +150,13 @@ /* Power management controller */ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237S_LPC), 0); - if (dev == PCI_DEV_INVALID) - die("Power management controller not found\n"); + if (dev == PCI_DEV_INVALID) { + /* Power management controller */ + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237A_LPC), 0); + if (dev == PCI_DEV_INVALID) + die("Power management controller not found\n"); + } }
/* Make sure the RTC power well is up before touching smbus. */ @@ -242,15 +248,20 @@ if (dev == PCI_DEV_INVALID) { /* Power management controller */ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237A_LPC), 0); + } + if (dev == PCI_DEV_INVALID) { + /* Power management controller */ + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237S_LPC), 0); - if (dev == PCI_DEV_INVALID) - return;
devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237_VLINK), 0);
- if (devctl == PCI_DEV_INVALID) + if (devctl == PCI_DEV_INVALID) { + print_err("vt8237_sb_enable_fid_vid() failed\n"); return; + }
/* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1); @@ -297,7 +308,7 @@ if (dev == PCI_DEV_INVALID) { /* Power management controller */ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237S_LPC), 0); + PCI_DEVICE_ID_VIA_VT8237A_LPC), 0); if (dev == PCI_DEV_INVALID) return; } @@ -321,7 +332,7 @@ if (dev == PCI_DEV_INVALID) { /* Power management controller */ dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237S_LPC), 0); + PCI_DEVICE_ID_VIA_VT8237A_LPC), 0); if (dev == PCI_DEV_INVALID) die("Power management controller not found\n"); } Index: src/include/device/pci_ids.h =================================================================== --- src/include/device/pci_ids.h (revision 5976) +++ src/include/device/pci_ids.h (working copy) @@ -1219,6 +1219,7 @@ #define PCI_DEVICE_ID_VIA_K8T890CE_BR 0xb188 #define PCI_DEVICE_ID_VIA_VT6420_SATA 0x3149 #define PCI_DEVICE_ID_VIA_VT8237R_LPC 0x3227 +#define PCI_DEVICE_ID_VIA_VT8237A_LPC 0x3337 #define PCI_DEVICE_ID_VIA_VT8237S_LPC 0x3372 #define PCI_DEVICE_ID_VIA_VT8237_SATA 0x5372 #define PCI_DEVICE_ID_VIA_VT8237_VLINK 0x287e Index: src/mainboard/asus/Kconfig =================================================================== --- src/mainboard/asus/Kconfig (revision 5976) +++ src/mainboard/asus/Kconfig (working copy) @@ -25,6 +25,8 @@ bool "A8N-E" config BOARD_ASUS_A8V_E_SE bool "A8V-E SE" +config BOARD_ASUS_M2V + bool "M2V" config BOARD_ASUS_M2V_MX_SE bool "M2V-MX SE" config BOARD_ASUS_M4A785M @@ -50,6 +52,7 @@
source "src/mainboard/asus/a8n_e/Kconfig" source "src/mainboard/asus/a8v-e_se/Kconfig" +source "src/mainboard/asus/m2v/Kconfig" source "src/mainboard/asus/m2v-mx_se/Kconfig" source "src/mainboard/asus/m4a785-m/Kconfig" source "src/mainboard/asus/mew-am/Kconfig" diff -Naru src/mainboard/asus/m2v.none/acpi_tables.c src/mainboard/asus/m2v/acpi_tables.c --- src/mainboard/asus/m2v.none/acpi_tables.c 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/acpi_tables.c 2010-10-20 19:17:51.000000000 +0200 @@ -0,0 +1,156 @@ +/* + * This file is part of the coreboot project. + * + * Written by Stefan Reinauer stepan@openbios.org. + * ACPI FADT, FACS, and DSDT table support added by + * + * Copyright (C) 2004 Stefan Reinauer stepan@openbios.org + * Copyright (C) 2005 Nick Barker nick.barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include <device/device.h> +#include <device/pci_ids.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8t890.h" + +extern const unsigned char AmlCode[]; + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + device_t dev; + struct resource *res; + + dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CE_5, 0); + if (!dev) + return current; + + res = find_resource(dev, K8T890_MMCONFIG_MBAR); + if (res) { + current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) + current, res->base, 0x0, 0x0, 0xff); + } + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + unsigned int gsi_base = 0x18; + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapics(current); + + /* Write SB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + VT8237R_APIC_ID, IO_APIC_ADDR, 0); + + /* Write NB IOAPIC. */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, + K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base); + + /* IRQ9 ACPI active low. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); + + /* IRQ0 -> APIC IRQ2. */ + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0x0); + + /* Create all subtables for processors. */ + current = acpi_create_madt_lapic_nmis(current, + MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); + + return current; +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_srat_t *srat; + acpi_rsdt_t *rsdt; + acpi_madt_t *madt; + acpi_mcfg_t *mcfg; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + + /* Align ACPI tables to 16 byte. */ + start = (start + 0x0f) & -0x10; + current = start; + + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT table. */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* Clear all table memory. */ + memset((void *) start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt, NULL); + acpi_write_rsdt(rsdt); + + /* We explicitly add these tables later on: */ + printk(BIOS_DEBUG, "ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + dsdt = (acpi_header_t *)current; + memcpy(dsdt, &AmlCode, sizeof(acpi_header_t)); + current += dsdt->length; + memcpy(dsdt, &AmlCode, dsdt->length); + dsdt->checksum = 0; /* Don't trust iasl to get this right. */ + dsdt->checksum = acpi_checksum((u8*)dsdt, dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, + dsdt->length); + printk(BIOS_DEBUG, "ACPI: * FADT\n"); + + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdp, fadt); + + /* If we want to use HPET timers Linux wants it in MADT. */ + printk(BIOS_DEBUG, "ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdp, madt); + printk(BIOS_DEBUG, "ACPI: * MCFG\n"); + mcfg = (acpi_mcfg_t *) current; + acpi_create_mcfg(mcfg); + current += mcfg->header.length; + acpi_add_table(rsdp, mcfg); + + printk(BIOS_DEBUG, "ACPI: * SRAT\n"); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdp, srat); + + printk(BIOS_INFO, "ACPI: done.\n"); + return current; +} diff -Naru src/mainboard/asus/m2v.none/chip.h src/mainboard/asus/m2v/chip.h --- src/mainboard/asus/m2v.none/chip.h 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/chip.h 2010-10-20 19:17:51.000000000 +0200 @@ -0,0 +1,22 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; + +struct mainboard_config {}; diff -Naru src/mainboard/asus/m2v.none/cmos.layout src/mainboard/asus/m2v/cmos.layout --- src/mainboard/asus/m2v.none/cmos.layout 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/cmos.layout 2010-10-20 19:17:51.000000000 +0200 @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 multi_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 amd_reserved + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff -Naru src/mainboard/asus/m2v.none/devicetree.cb src/mainboard/asus/m2v/devicetree.cb --- src/mainboard/asus/m2v.none/devicetree.cb 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/devicetree.cb 2010-10-21 01:50:56.000000000 +0200 @@ -0,0 +1,75 @@ +chip northbridge/amd/amdk8/root_complex # Root complex + device lapic_cluster 0 on # APIC cluster + chip cpu/amd/socket_AM2 # CPU + device lapic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # mc0 + device pci 18.0 on # Northbridge + # Devices on link 0, link 0 == LDT 0 + chip southbridge/via/vt8237r # Southbridge + register "ide0_enable" = "1" # Enable IDE channel 0 + register "ide1_enable" = "1" # Enable IDE channel 1 + register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 + register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 + register "fn_ctrl_lo" = "0xc0" # Enable SB functions + register "fn_ctrl_hi" = "0x0d" # Enable SB functions + device pci 0.0 on end # HT + device pci f.1 on end # IDE + device pci 11.0 on # LPC + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip superio/ite/it8712f # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 (N/A on this board) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 on # Environment controller + io 0x60 = 0x290 + io 0x62 = 0x230 + irq 0x70 = 0x00 + end + device pnp 2e.5 off end # PS/2 keyboard + device pnp 2e.6 off end # PS/2 mouse + device pnp 2e.7 off end # GPIO config + device pnp 2e.8 off end # Midi port + device pnp 2e.9 off end # Game port + device pnp 2e.a off end # IR + end + end + device pci 12.0 off end # VIA LAN (off, other chip used) + end + chip southbridge/via/k8t890 # "Southbridge" K8T890 + end + end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end +end diff -Naru src/mainboard/asus/m2v.none/dsdt.asl src/mainboard/asus/m2v/dsdt.asl --- src/mainboard/asus/m2v.none/dsdt.asl 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/dsdt.asl 2010-10-20 19:17:51.000000000 +0200 @@ -0,0 +1,211 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2004 Nick Barker Nick.Barker9@btinternet.com + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ISA portions taken from QEMU acpi-dsdt.dsl. + */ + +DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1) +{ + /* Define the main processor.*/ + Scope (_PR) + { + Processor (_PR.CPU0, 0x00, 0x000000, 0x00) {} + Processor (_PR.CPU1, 0x01, 0x000000, 0x00) {} + } + + /* For now only define 2 power states: + * - S0 which is fully on + * - S5 which is soft off + * Any others would involve declaring the wake up methods. + */ + Name (_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) + Name (_S5, Package () { 0x02, 0x02, 0x00, 0x00 }) + + /* Root of the bus hierarchy */ + Scope (_SB) + { + /* Top PCI device */ + Device (PCI0) + { + Name (_HID, EisaId ("PNP0A03")) + Name (_ADR, 0x00) + Name (_UID, 0x00) + Name (_BBN, 0x00) + + /* PCI Routing Table */ + /* aaa */ + Name (_PRT, Package () { + Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, /* Slot 0xB */ + Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 }, + Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 }, + Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 }, + Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, /* Slot 0xC */ + Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 }, + Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 }, + Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 }, + Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, /* Slot 0xD */ + Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 }, + Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 }, + Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 }, + Package (0x04) { 0x000FFFFF, 0x01, 0x00, 0x14 }, /* 0xf SATA IRQ 20 */ + Package (0x04) { 0x000FFFFF, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */ + Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */ + Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 }, + Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 }, + Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, /* AC97, MC97 */ + Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */ + Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B }, + Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B }, + Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */ + Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */ + Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */ + Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */ + }) + + Device (PEGG) + { + Name (_ADR, 0x00020000) + Name (_UID, 0x00) + Name (_BBN, 0x02) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B }, + }) + } + + Device (PEX0) + { + Name (_ADR, 0x00030000) + Name (_UID, 0x00) + Name (_BBN, 0x03) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F }, + }) + } + + Device (PEX1) + { + Name (_ADR, 0x00030001) + Name (_UID, 0x00) + Name (_BBN, 0x04) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, /* PCIE IRQ32-IRQ35 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 }, + }) + } + + Device (PEX2) + { + Name (_ADR, 0x00030002) + Name (_UID, 0x00) + Name (_BBN, 0x05) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, /* PCIE IRQ36-IRQ39 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 }, + }) + } + + Device (PEX3) + { + Name (_ADR, 0x00030003) + Name (_UID, 0x00) + Name (_BBN, 0x06) + Name (_PRT, Package () { + Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, /* PCIE IRQ40-IRQ43 */ + Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 }, + Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A }, + Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B }, + }) + } + + Device (ISA) { + Name (_ADR, 0x00110000) + + /* PS/2 keyboard (seems to be important for WinXP install) */ + Device (KBD) + { + Name (_HID, EisaId ("PNP0303")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) + IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) + IRQNoFlags () {1} + }) + Return (TMP) + } + } + + /* PS/2 mouse */ + Device (MOU) + { + Name (_HID, EisaId ("PNP0F13")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (TMP, ResourceTemplate () { + IRQNoFlags () {12} + }) + Return (TMP) + } + } + + /* PS/2 floppy controller */ + Device (FDC0) + { + Name (_HID, EisaId ("PNP0700")) + Method (_STA, 0, NotSerialized) + { + Return (0x0f) + } + Method (_CRS, 0, NotSerialized) + { + Name (BUF0, ResourceTemplate () { + IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04) + IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01) + IRQNoFlags () {6} + DMA (Compatibility, NotBusMaster, Transfer8) {2} + }) + Return (BUF0) + } + } + } + } + } +} diff -Naru src/mainboard/asus/m2v.none/Kconfig src/mainboard/asus/m2v/Kconfig --- src/mainboard/asus/m2v.none/Kconfig 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/Kconfig 2010-10-20 22:52:31.000000000 +0200 @@ -0,0 +1,79 @@ +if BOARD_ASUS_M2V + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select ARCH_X86 + select CPU_AMD_SOCKET_AM2 + select DIMM_DDR2 + select K8_HT_FREQ_1G_SUPPORT + select NORTHBRIDGE_AMD_AMDK8 + select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX + select SOUTHBRIDGE_VIA_VT8237R + select SOUTHBRIDGE_VIA_K8T890 + select SUPERIO_ITE_IT8712F + select CACHE_AS_RAM + select HAVE_OPTION_TABLE + select HAVE_ACPI_TABLES + select HAVE_MP_TABLE + select BOARD_ROMSIZE_KB_512 + select RAMINIT_SYSINFO + select TINY_BOOTBLOCK +# select HAVE_MAINBOARD_RESOURCES + +config MAINBOARD_DIR + string + default asus/m2v + +config DCACHE_RAM_BASE + hex + default 0xcc000 + +config DCACHE_RAM_SIZE + hex + default 0x4000 + +config DCACHE_RAM_GLOBAL_VAR_SIZE + hex + default 0x1000 + +config APIC_ID_OFFSET + hex + default 0x10 + +config SB_HT_CHAIN_ON_BUS0 + int + default 1 + +config MAINBOARD_PART_NUMBER + string + default "M2V" + +config HW_MEM_HOLE_SIZEK + hex + default 0 + +config MAX_CPUS + int + default 2 + +config MAX_PHYSICAL_CPUS + int + default 1 + +config HEAP_SIZE + hex + default 0x40000 + +config HT_CHAIN_END_UNITID_BASE + hex + default 0x20 + +config HT_CHAIN_UNITID_BASE + hex + default 0x0 + +config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID + hex + default 0x1043 + +endif # BOARD_ASUS_M2V diff -Naru src/mainboard/asus/m2v.none/mainboard.c src/mainboard/asus/m2v/mainboard.c --- src/mainboard/asus/m2v.none/mainboard.c 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/mainboard.c 2010-10-20 19:57:44.000000000 +0200 @@ -0,0 +1,28 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include "chip.h" + +struct chip_operations mainboard_ops = { + CHIP_NAME("ASUS M2V Mainboard") +}; diff -Naru src/mainboard/asus/m2v.none/mptable.c src/mainboard/asus/m2v/mptable.c --- src/mainboard/asus/m2v.none/mptable.c 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/mptable.c 2010-10-20 19:57:57.000000000 +0200 @@ -0,0 +1,146 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <string.h> +#include <stdint.h> +#include <arch/smp/mpspec.h> +#include <arch/ioapic.h> +#include "southbridge/via/vt8237r/vt8237r.h" +#include "southbridge/via/k8t890/k8t890.h" + +static void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "COREBOOT"; + static const char productid[12] = "M2V "; + struct mp_config_table *mc; + int bus_isa = 42; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* Initially just the header. */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* Not yet computed. */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet. */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + + /* Bus: Bus ID Type */ + smp_write_bus(mc, 0, "PCI "); + smp_write_bus(mc, 1, "PCI "); + smp_write_bus(mc, 2, "PCI "); + smp_write_bus(mc, 3, "PCI "); + smp_write_bus(mc, 4, "PCI "); + smp_write_bus(mc, 5, "PCI "); + smp_write_bus(mc, 6, "PCI "); + smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, IO_APIC_ADDR); + smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE); + + mptable_add_isa_interrupts(mc, bus_isa, VT8237R_APIC_ID, 0); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17 + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf); + + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13); + + /* Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums. */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), + mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} diff -Naru src/mainboard/asus/m2v.none/romstage_a8v-e_se.c src/mainboard/asus/m2v/romstage_a8v-e_se.c --- src/mainboard/asus/m2v.none/romstage_a8v-e_se.c 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/romstage_a8v-e_se.c 2010-10-20 20:43:06.000000000 +0200 @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2006 MSI + * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) + * Copyright (C) 2007 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned int get_sbdn(unsigned bus); + +/* Used by raminit. */ +#define QRANK_DIMM_SUPPORT 1 + +/* Used by init_cpus and fidvid */ +#define SET_FIDVID 1 + +/* If we want to wait for core1 done before DQS training, set it to 0. */ +#define SET_FIDVID_CORE0_ONLY 1 + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c" +#include "southbridge/via/vt8237r/vt8237r_early_smbus.c" +#include "northbridge/amd/amdk8/debug.c" /* After vt8237r_early_smbus.c! */ +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) +#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED) +#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI) +#define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC) + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +static void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +#include <reset.h> +void soft_reset(void) +{ + uint8_t tmp; + + set_bios_reset(); + print_debug("soft reset \n"); + + /* PCI reset */ + tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); + tmp |= 0x01; + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); + + while (1) { + /* daisy daisy ... */ + hlt(); + } +} + +// defines S3_NVRAM_EARLY: +#include "southbridge/via/k8t890/k8t890_early_car.c" + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit.c" +#include "lib/generic_sdram.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#include "cpu/amd/car/post_cache_as_ram.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/resourcemap.c" + +unsigned int get_sbdn(unsigned bus) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); + return (dev >> 15) & 0x1f; +} + +static void sio_init(void) +{ + u8 reg; + + pnp_enter_ext_func_mode(SERIAL_DEV); + /* We have 24MHz input. */ + reg = pnp_read_config(SERIAL_DEV, 0x24); + pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); + /* We have GPIO for KB/MS pin. */ + reg = pnp_read_config(SERIAL_DEV, 0x2a); + pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1)); + /* We have all RESTOUT and even some reserved bits, too. */ + reg = pnp_read_config(SERIAL_DEV, 0x2c); + pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0)); + pnp_exit_ext_func_mode(SERIAL_DEV); + + pnp_enter_ext_func_mode(ACPI_DEV); + pnp_set_logical_device(ACPI_DEV); + /* + * Set the delay rising time from PWROK_LP to PWROK_ST to + * 300 - 600ms, and 0 to vice versa. + */ + reg = pnp_read_config(ACPI_DEV, 0xe6); + pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0)); + /* 1 Use external suspend clock source 32.768KHz. Undocumented?? */ + reg = pnp_read_config(ACPI_DEV, 0xe4); + pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10)); + pnp_exit_ext_func_mode(ACPI_DEV); + + pnp_enter_ext_func_mode(GPIO_DEV); + pnp_set_logical_device(GPIO_DEV); + /* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */ + pnp_write_config(GPIO_DEV, 0x30, 0x09); /* Enable GPIO 2 & GPIO 5. */ + pnp_write_config(GPIO_DEV, 0xe2, 0x00); /* No inversion */ + pnp_write_config(GPIO_DEV, 0xe5, 0x00); /* No inversion */ + pnp_write_config(GPIO_DEV, 0xe3, 0x03); /* 0000 0011, 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe0, 0xde); /* 1101 1110, 0=output 1=input */ + pnp_write_config(GPIO_DEV, 0xe1, 0x01); /* Set output val. */ + pnp_write_config(GPIO_DEV, 0xe4, 0xb4); /* Set output val (1011 0100). */ + pnp_exit_ext_func_mode(GPIO_DEV); +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, + (0xa << 3) | 1, (0xa << 3) | 3, 0, 0, + // Node 1 + (0xa << 3) | 4, (0xa << 3) | 6, 0, 0, + (0xa << 3) | 5, (0xa << 3) | 7, 0, 0, + }; + unsigned bsp_apicid = 0; + int needs_reset = 0; + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + sio_init(); + w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + uart_init(); + console_init(); + enable_rom_decode(); + + print_info("now booting... fallback\n"); + + /* Is this a CPU only reset? Or is this a secondary CPU? */ + if (!cpu_init_detectedx && boot_cpu()) { + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + } + + sio_init(); + w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + uart_init(); + console_init(); + enable_rom_decode(); + + print_info("now booting... real_main\n"); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* Halt if there was a built in self test failure. */ + report_bist_failure(bist); + + setup_default_resource_map(); + setup_coherent_ht_domain(); + wait_all_core0_started(); + + print_info("now booting... Core0 started\n"); + +#if CONFIG_LOGICAL_CPUS==1 + /* It is said that we should start core1 after all core0 launched. */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + init_timer(); + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= k8t890_early_setup_ht(); + + if (needs_reset) { + print_debug("ht reset -\n"); + soft_reset(); + } + + /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ + enable_fid_change(); + init_fidvid_bsp(bsp_apicid); + + /* Stop the APs so we can start them later in init. */ + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + post_cache_as_ram(); +} + diff -Naru src/mainboard/asus/m2v.none/romstage.c src/mainboard/asus/m2v/romstage.c --- src/mainboard/asus/m2v.none/romstage.c 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/romstage.c 2010-10-20 22:58:40.000000000 +0200 @@ -0,0 +1,210 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2006 MSI + * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) + * Copyright (C) 2008 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned int get_sbdn(unsigned bus); + +/* Used by raminit. */ +#define QRANK_DIMM_SUPPORT 1 + +/* Used by init_cpus and fidvid */ +#define SET_FIDVID 1 + +/* If we want to wait for core1 done before DQS training, set it to 0. */ +#define SET_FIDVID_CORE0_ONLY 1 + +#if CONFIG_K8_REV_F_SUPPORT == 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 +#endif + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/amd/mtrr.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/ite/it8712f/it8712f_early_serial.c" +#include "southbridge/via/vt8237r/vt8237r_early_smbus.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define WATCHDOG_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +static void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +// defines S3_NVRAM_EARLY: +#include "southbridge/via/k8t890/k8t890_early_car.c" + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#include "cpu/amd/car/post_cache_as_ram.c" +#include "cpu/amd/model_fxx/init_cpus.c" + +#define SB_VFSMAF 0 + +/* this function might fail on some K8 CPUs with errata #181 */ +static void ldtstop_sb(void) +{ + print_debug("toggle LDTSTP#\n"); + u8 reg = inb (VT8237R_ACPI_IO_BASE + 0x5c); + reg = reg ^ (1 << 0); + outb(reg, VT8237R_ACPI_IO_BASE + 0x5c); + reg = inb(VT8237R_ACPI_IO_BASE + 0x15); + print_debug("done\n"); +} + +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/resourcemap.c" + +void soft_reset(void) +{ + uint8_t tmp; + + set_bios_reset(); + print_debug("soft reset \n"); + + /* PCI reset */ + tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); + tmp |= 0x01; + /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */ + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); + + while (1) { + /* daisy daisy ... */ + hlt(); + } +} + +unsigned int get_sbdn(unsigned bus) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); + return (dev >> 15) & 0x1f; +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, + (0xa << 3) | 1, (0xa << 3) | 3, 0, 0, + // Node 1 + (0xa << 3) | 4, (0xa << 3) | 6, 0, 0, + (0xa << 3) | 5, (0xa << 3) | 7, 0, 0, + }; + unsigned bsp_apicid = 0; + int needs_reset = 0; + struct sys_info *sysinfo = + (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + it8712f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + it8712f_kill_watchdog(); + it8712f_enable_3vsbsw(); + uart_init(); + console_init(); + enable_rom_decode(); + + printk(BIOS_INFO, "now booting... \n"); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* Halt if there was a built in self test failure. */ + report_bist_failure(bist); + setup_default_resource_map(); + setup_coherent_ht_domain(); + wait_all_core0_started(); + + printk(BIOS_INFO, "now booting... All core 0 started\n"); + +#if CONFIG_LOGICAL_CPUS==1 + /* It is said that we should start core1 after all core0 launched. */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + init_timer(); + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + needs_reset = optimize_link_coherent_ht(); + print_debug_hex8(needs_reset); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + print_debug_hex8(needs_reset); + needs_reset |= k8t890_early_setup_ht(); + print_debug_hex8(needs_reset); + + if (needs_reset) { + printk(BIOS_DEBUG, "ht reset -\n"); + soft_reset(); + printk(BIOS_DEBUG, "FAILED!\n"); + } + + /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ + /* allow LDT STOP asserts */ + vt8237_sb_enable_fid_vid(); + + enable_fid_change(); + print_debug("after enable_fid_change\n"); + + init_fidvid_bsp(bsp_apicid); + + /* Stop the APs so we can start them later in init. */ + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + enable_smbus(); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + post_cache_as_ram(); +} + diff -Naru src/mainboard/asus/m2v.none/romstage_m2v-mx_se.c src/mainboard/asus/m2v/romstage_m2v-mx_se.c --- src/mainboard/asus/m2v.none/romstage_m2v-mx_se.c 1970-01-01 01:00:00.000000000 +0100 +++ src/mainboard/asus/m2v/romstage_m2v-mx_se.c 2010-10-20 20:43:15.000000000 +0200 @@ -0,0 +1,213 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2006 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * Copyright (C) 2006 MSI + * (Written by Bingxun Shi bingxunshi@gmail.com for MSI) + * Copyright (C) 2008 Rudolf Marek r.marek@assembler.cz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +unsigned int get_sbdn(unsigned bus); + +/* Used by raminit. */ +#define QRANK_DIMM_SUPPORT 1 + +/* Used by init_cpus and fidvid */ +#define SET_FIDVID 1 + +/* If we want to wait for core1 done before DQS training, set it to 0. */ +#define SET_FIDVID_CORE0_ONLY 1 + +#if CONFIG_K8_REV_F_SUPPORT == 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 +#endif + +#include <stdint.h> +#include <string.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/amd/mtrr.h> +#include <cpu/x86/lapic.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/ite/it8712f/it8712f_early_serial.c" +#include "southbridge/via/vt8237r/vt8237r_early_smbus.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "cpu/x86/bist.h" +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define WATCHDOG_DEV PNP_DEV(0x2e, IT8712F_GPIO) + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +static void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +// defines S3_NVRAM_EARLY: +#include "southbridge/via/k8t890/k8t890_early_car.c" + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "lib/generic_sdram.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#include "cpu/amd/car/post_cache_as_ram.c" +#include "cpu/amd/model_fxx/init_cpus.c" + +#define SB_VFSMAF 0 + +/* this function might fail on some K8 CPUs with errata #181 */ +static void ldtstop_sb(void) +{ + print_debug("toggle LDTSTP#\n"); + u8 reg = inb (VT8237R_ACPI_IO_BASE + 0x5c); + reg = reg ^ (1 << 0); + outb(reg, VT8237R_ACPI_IO_BASE + 0x5c); + reg = inb(VT8237R_ACPI_IO_BASE + 0x15); + print_debug("done\n"); +} + +#include "cpu/amd/model_fxx/fidvid.c" +#include "northbridge/amd/amdk8/resourcemap.c" + +void soft_reset(void) +{ + uint8_t tmp; + + set_bios_reset(); + print_debug("soft reset \n"); + + /* PCI reset */ + tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); + tmp |= 0x01; + /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */ + pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); + + while (1) { + /* daisy daisy ... */ + hlt(); + } +} + +unsigned int get_sbdn(unsigned bus) +{ + device_t dev; + + dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); + return (dev >> 15) & 0x1f; +} + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + // Node 0 + (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, + (0xa << 3) | 1, (0xa << 3) | 3, 0, 0, + // Node 1 + (0xa << 3) | 4, (0xa << 3) | 6, 0, 0, + (0xa << 3) | 5, (0xa << 3) | 7, 0, 0, + }; + unsigned bsp_apicid = 0; + int needs_reset = 0; + struct sys_info *sysinfo = + (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + + it8712f_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + it8712f_kill_watchdog(); + it8712f_enable_3vsbsw(); + uart_init(); + console_init(); + enable_rom_decode(); + + printk(BIOS_INFO, "now booting... \n"); + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* Halt if there was a built in self test failure. */ + report_bist_failure(bist); + setup_default_resource_map(); + setup_coherent_ht_domain(); + wait_all_core0_started(); + + printk(BIOS_INFO, "now booting... All core 0 started\n"); + +#if CONFIG_LOGICAL_CPUS==1 + /* It is said that we should start core1 after all core0 launched. */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + init_timer(); + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + + needs_reset = optimize_link_coherent_ht(); + print_debug_hex8(needs_reset); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + print_debug_hex8(needs_reset); + needs_reset |= k8t890_early_setup_ht(); + print_debug_hex8(needs_reset); + + vt8237_early_network_init(NULL); + vt8237_early_spi_init(); + + if (needs_reset) { + printk(BIOS_DEBUG, "ht reset -\n"); + soft_reset(); + printk(BIOS_DEBUG, "FAILED!\n"); + } + + /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ + /* allow LDT STOP asserts */ + vt8237_sb_enable_fid_vid(); + + enable_fid_change(); + print_debug("after enable_fid_change\n"); + + init_fidvid_bsp(bsp_apicid); + + /* Stop the APs so we can start them later in init. */ + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + enable_smbus(); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + post_cache_as_ram(); +} +