-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
flashrom output with -V <snip> - -bash-3.00# ./flashrom -f -r -V -c 28F320C3B test flashrom v0.9.0-r535 Found candidate at: 00000500-00000c68 Found coreboot table at 0x00000500. coreboot table found at 0x500. coreboot header(24) checksum: 30c4 table(1896) checksum: 3619 entries: 13 Vendor ID: Intel, part ID: SE7520JR22D Found chipset "Intel ICH5/ICH5R", enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1 OK.
Unknown vendor:board from coreboot table or -m option: Intel:SE7520JR22D
Calibrating delay loop... 1013M loops per second, 100 myus = 198 us. OK. No EEPROM/flash device found. Force read (-f -r -c) requested, forcing chip probe success: flashrom does not support a flash chip named '28F320C3B'. Run flashrom -L to view the hardware supported in this flashrom version. - -bash-3.00# </snip>
Technical information from Intel http://download.intel.com/support/motherboards/server/se7520jr2/sb/se7520jr2...
<snip> 3.4.11 BIOS Flash The BIOS supports the Intel® 28F320C3B flash part. The flash part is a 4-MB flash ROM with 2MB programmable. The flash ROM contains system initialization routines, setup utility, and runtime support routines. The exact layout is subject to change, as determined by Intel. A 128- KB block is available for storing OEM code (user binary) and custom logos. </snip>
Thanks in advance,
Joshua McDowell