The card has problem is not a VGA card. It's a 2-channle-video-capture-card. There is no problem with 1-channel-video-capture-card.
David Xiong
-----原始邮件----- 发件人: ollie lho [mailto:ollie@sis.com.tw] 发送时间: 2002年10月1日 11:59 收件人: David Xiong 抄送: Ronald G Minnich; steve@nexpath.com; linuxbios@clustermatic.org 主题: RE: No IRQ Known for interrupt pin A of device 02:04.0. Please tryusing pci=biosirq
On Tue, 2002-10-01 at 11:35, David Xiong wrote:
The mainboard is K7SEM and irq_tables.c is already in the source tree. I run the program getpir and get an irq_tables.c file which is the same as the one in the source tree. The program util/getpir reports 6 slot found, whether I plug in the multimedia card or not, and produce exact the same irq_tables.c.
And the option HAVE_PIRQ_TABLE=1 is set in the config file of the source tree.
I traced into the kernel source and found that the original BIOS set IRQ when POST, but linuxbios does not do so. The IRQ is 0 when start up with linuxbios. When the driver of the multimedia card comes up, it find the card has not an IRQ. Then the driver try to get one from the irq_table, but the PCI device is not in the irq_table, so it can not find one or assign one to the device.
What else can I do? Can I hard code one irq to the card?
The kernel pci-irq code refuse to setup IRQ for VGA devices. You have to set it up yourself. BTW, your card still need some init code in your VGA BIOS.
Ollie