[coreboot] problem about ioapic

[aaron lwe]

On Mon, Apr 21, 2008 at 11:49 AM, aaron lwe  wrote:
> Hi,
>
> I've programmed CN700 D0F7 Rx70-7F with the factory BIOS value, but
>   the problem remained.
>   And I've tried both to use acpi madt table(when acpi enabled) and
>   mptable(when acpi off), so I
>   guess it shouldn't be a configuration tables's problem.
>
> The CN700 D0F7 Rx7c's value is 0 and it's not mentioned on the
>   datasheet, and there is no D11F7
>   on VT8237R, I wonder if I misunderstood your meaning?
>
> Thanks

My fault, I messed up D0F3 Rx86 / D0F7 RxE6, it should be 0x2d.
now kernel boots ok, only the ethernet card has problem with getting an irq.
I'll see if it's a table configuration problem.

Thanks.