Hi,
On Sat, Jun 28, 2008 at 07:43:18PM +0200, Hannes Hegewald wrote:
hey, here's the 'lspci -tvnn', 'superiotool -dV', 'flashrom -V', getpir and /proc/cpu output for the Neoware EON 4000S board/Thin Client.
Thanks a lot!
I've almost finished a new target for the Neoware Eon 4000s, but some more information would be useful to make the port more complete:
- Is there some kind of mainboard vendor/name printed on the board? The product is called "Neoware Eon 4000s" but the mainboard may have a different name. It seems I cannot find anything on the photo at http://www.coreboot.org/Image:Neoware_eon4000s.jpg, but maybe there's something on the other side (or under the SODIMM)?
- Can the board boot from IDE0 _and_ IDE1? I can only spot one IDE connector, so we could disable IDE1 in coreboot?
- I assume there's no floppy connector, so we can disable it in coreboot?
- I'll create a wiki status/HOWTO page for the board, if you have some time could you test all of the hardware/software features on the board (after the patch has been committed)?
- Can you run 'sensors-detect' and 'sensors' on the original BIOS and (if a sensors is found and works) check if it also works with coreboot?
Thanks, Uwe.