On Mon, Jun 20, 2005 at 03:44:39PM +0400, Anton Borisov wrote:
On Mon, 20 Jun 2005 12:32:33 +0100 Jonathan McDowell noodles@earth.li wrote:
How much memory is on your board? I think the RAM detection stuff is
256 MB of RAM.
wrong and that's possibly causing FILO problems; from your minicom.capped2.bz2:
I would set ram size to 0x3fc000 Kbytes
Should I learn about a new option inside Config.filo.lb?
No, that's in your log output; from line 223 in vt8623/northbridge.c
I've got a list of chipset registers the Award BIOS seems to twiddle, so I might add those to the enable_mainboard function to see if that at least gets us further.
Well, this could help. Can you attach it?
I've attached a modified src/mainboard/via/epia-m/auto.c which sets all the chipset registers from the Award table I extracted. I don't know if it'll help or not though.
I don't remember but it seems to me I've seen somewhere the CMOS map according to each LB decides which image to load "Normal" or "Fallback". Am I right?
I /think/ so; see do_normal_boot in src/pc80/mc146818rtc_early.c
J.