Hi Tobias,
I used UEFItool to extract the Nvidia option ROM, that wiki page under "UEFI method":
https://www.coreboot.org/VGA_support
On the T430 I found two blobs, one of about 60k in size and one that's about double the size, but I wasn't able to properly test yet which one is needed.
Best regards Christoph Pomaska / Sellerie
Am 4. April 2018 12:41:35 nachm. schrieb Tobias Dausend t.dausend@openmails.org:
Hello Tobias,
You can switch between GPUs by changing the value of the hybrid_graphics_mode CMOS setting using nvramcui or nvramtool. Currently, for the T430 this field can be set to either Integrated only or Dedicated only. Make sure you are using CMOS for configuration values. Unfortunately, I was unable to switch the power for the dGPU off at all, which resulted in rather high power consumption even if only the integrated GPU is enabled.
Regards, Micha? Kope? Hello,
thanks for the feedback. What version of Coreboot did you use? Is the stable 4.7 enough or should I use a snapshot from the git-repository? Also the question how to include the VGA-bios for the NVidia-card. I did a compilation with the VGA-bios for Intel and included the rom afterwards with cbfstool. Is this the correct way to do as "optional rom"?
Thanks!
Regards, Tobias.
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot